Effect of Cooling Rate on Structure and Properties of Wear-Resistant Low Chromium Cast Iron after Hot Deformation

被引：0
作者：
CHANG Limin WANG Haiyan HUANG Yadian XU Hong ZHOU Xiaoguang Jilin Normal University Siping China Yanshan University Qinhuangdao China Siping Institute of Science and Technology Siping China [1 ,2 ,3 ,1 ,1 ,1 ,136000 ,2 ,66004 ,3 ,13600 ]
机构：
来源：
Journal of Iron and Steel Research(International) | 2005年 / 02期
关键词：
cooling rate; hot deformation; structure; property; wear resistance; low chromium cast iron;
D O I：
10.13228/j.boyuan.issn1006-706x.2005.02.010
中图分类号：
TG306 [压力加工工艺];
学科分类号：
080201 ; 080503 ;
摘要：
The effect of cooling rate on structure and properties of wear-resistant low chromium cast iron after 40% hot deformation was investigated by metallographic and scanning electron microscope. The results show that the cooling rate is closely related to the structure and properties, and for the cast iron, the best comprehensive mechanical properties were obtained by forced air cooling with a cooling rate as about 7 ℃/s. The reason and regularity for the change of mechanical properties were analyzed.
引用
收藏
页码：52 / 55+63 +63
页数：5
相关论文
共 50 条
[31]   Effect of Destabilisation Period and Post Destabilisation Cooling Rate on the Evolution of Microstructure in 8.0 wt% Chromium White Cast Iron [J].
Mandal, Siddhartha Sankar ;
Ghosh, Karuna Sindhu ;
Mondal, Dipak Kumar .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (08) :2067-2081
[32]   Effect of MC Type Carbides on Wear Resistance of High Wear Resistant Cast Iron Rolls Developed for Work Rolls of Hot Strip Mills [J].
Kamimiyada, Kazunori ;
Ishikawa, Shinya ;
Miyahara, Hirofumi ;
Konno, Yuji .
ISIJ INTERNATIONAL, 2021, 61 (10) :2597-2604
[33]   Effect of MC type carbides on wear resistance of high wear resistant cast iron rolls developed for work rolls of hot strip mills [J].
Kamimiyada K. ;
Ishikawa S. ;
Miyahara H. ;
Konno Y. .
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2020, 106 (12) :883-891
[34]   The Effect of Cooling Rate, Section Size and Alloying on Matrix Structure Formation in Pearlitic Grey Cast Iron [J].
Svensson, Henrik ;
Sjogren, Torsten .
SCIENCE AND PROCESSING OF CAST IRON IX, 2011, 457 :169-+
[35]   Surface Properties of High-Strength Cast Iron Parts with Wear-Resistant Composite Coatings Synthesized by Electrospark Alloying Method. Pt. 2. Investigation of the Structure and Microhardness of the Treated Cast-Iron Surfaces [J].
Tarelnyk, V. B. ;
Haponova, O. P. ;
Tarelnyk, N., V ;
Dumanchuk, M. Yu. ;
Maifat, M. M. ;
Mikulina, M. A. ;
Kozin, V. M. .
METALLOPHYSICS AND ADVANCED TECHNOLOGIES, 2025, 47 (07)
[36]   PROPERTIES OF HIGH-CHROMIUM CAST IRON/LOW-CARBON STEEL BIMETAL FABRICATED BY HOT-ROLLING [J].
Yuan, Guofeng ;
Xiao, Xianke ;
Zhao, Fei .
MATERIALI IN TEHNOLOGIJE, 2022, 56 (06) :645-652
[37]   Effect of Hot Deformation on Dynamics of Thermal Fatigue Crack′s Propagation in high C-Cr Wear Resistant Cast Steel [J].
刘建华 ;
张瑞军 .
Journal of Rare Earths, 2006, (S2) :300-302
[38]   Effect of heat treatment on microstructure and mechanical properties of Ti-containing low alloy martensitic wear-resistant steel [J].
Kai Lan ;
Wang Ding ;
Yi-tao Yang .
China Foundry, 2023, 20 :329-338
[39]   Effect of heat treatment on microstructure and mechanical properties of Ti-containing low alloy martensitic wear-resistant steel [J].
Lan, Kai ;
Ding, Wang ;
Yang, Yi-tao .
CHINA FOUNDRY, 2023, 20 (04) :329-338
[40]   Effect of cooling rate on the structure and properties of low-carbon tube steel [J].
I. Yu. Pyshmintsev ;
A. N. Boryakova ;
M. A. Smirnov .
Metallurgist, 2008, 52 :464-469
12345