Preparation of Hydrogen through Catalytic Steam Reforming of Bio-oil

Hydrogen was prepared via catalytic steam reforming of bio-oil which was obtained from fast pyrolysis of biomass in a fluidized bed reactor.Influential factors including temperature,weight hourly space velocity(WHSV) of bio-oil,mass ratio of steam to bio-oil(S/B) as well as catalyst type on hydrogen selectivity and other desirable gas products were investigated.Based on hydrogen in stoichiometric potential and carbon balance in gaseous phase and feed,hydrogen yield and carbon selectivity were examined.The experimental results show that higher temperature favors the hydrogen selectivity by H2 mole fraction in gaseous products stream and it plays an important role in hydrogen yield and carbon selectivity.Higher hydrogen selectivity and yield,and carbon selectivity were obtained at lower bio-oil WHSV.In catalytic steam reforming system a maximum steam concentration value exists,at which hydrogen selectivity and yield,and carbon selectivity keep constant.Through experiments,preferential operation conditions were obtained as follows:temperature 800～850℃,bio-oil WHSV below 3.0 h-1,and mass ratio of steam to bio-oil 10～12.The performance tests indicate that Ni-based catalysts are optional,especially Ni/α-Al2O3 effective in the steam reforming process.