Frictional and Optical Properties of Diamond-Like-Carbon Coatings on Polycarbonate

被引：0
|
作者：
蔺增 [1 ,2 ]
王凤 [3 ]
高丁 [1 ]
巴德纯 [1 ]
刘春明 [2 ]
机构：
[1] School of Mechanical Engineering & Automation, Northeastern University
[2] School of Materials & Metallurgy, Northeastern University
[3] Shenyang Aeroengine Research Institute
来源：
Plasma Science and Technology | 2013年 / 07期
基金：
中国博士后科学基金; 中央高校基本科研业务费专项资金资助;
关键词：
diamond-like-carbon films; PECVD; microstructure; frictional and optical properties;
D O I：
暂无
中图分类号：
TN304.055 [];
学科分类号：
摘要：
In this work, diamond-like-carbon (DLC) films were deposited onto polycarbonate (PC) substrates by radio-frequency plasma-enhanced chemical vapor deposition (RF PECVD), and silicon films were prepared between DLC and PC substrates by magnetron sputtering deposition so as to improve the adhesion of the DLC films. The deposited films were investigated by means of field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Subsequently, the following frictional and optical properties of the films were measured: the friction coefficient by using a ball-on-disk tribometer, the scratch hardness by using a nano-indenter, the optical transmittance by using a UV/visible spectrometer. The effects of incident power upon the frictional and optical properties of the films were investigated. Films deposited at low incident powers showed large optical gaps, which decreased with increasing incident power. The optical properties of DLC films correlated to the sp 2 content of the coatings. High anti-scratch properties were obtained at higher values of incident power. The anti-scratch properties of DLC films correlated to the sp 3 content of the coatings.
引用
收藏
页码：690 / 695
页数：6
相关论文
共 50 条
  • [31] Properties of nitrogen-doped diamond-like-carbon films prepared by a laser ablation
    Hong, YK
    Kim, JJ
    Kim, JS
    Jeon, CI
    Park, C
    Kim, JK
    APPLIED SURFACE SCIENCE, 1999, 146 (1-4) : 269 - 273
  • [32] Deposition of hard diamond-like-carbon films at room temperature
    Brown, WD
    Beera, RA
    Naseem, HA
    Malshe, AP
    PROCEEDINGS OF THE THIRTEENTH INTERNATIONAL CONFERENCE ON CHEMICAL VAPOR DEPOSITION, 1996, 96 (05): : 670 - 678
  • [33] Structural properties of protective diamond-like-carbon thin films grown on multilayer graphene
    Liu, Jian
    Muinos, Henrique Vazquez
    Nordlund, Kai
    Djurabekova, Flyura
    JOURNAL OF PHYSICS-CONDENSED MATTER, 2019, 31 (50)
  • [34] Photochemical functionalisation of diamond-like-carbon for electronic neural interfaces
    Dugan, J.
    Claeyssens, F.
    JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 2014, 8 : 401 - 401
  • [35] Nanoscale wear of diamond-like-carbon coated AFM probes
    Turner, Kevin T.
    Liu, Jingjing
    Grierson, David S.
    Carpick, Robert W.
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 244
  • [36] WEAR AND TEM STUDIES OF PECVD DIAMOND-LIKE-CARBON FILMS
    ALLOUARD, M
    VARDAVOULIAS, LM
    THOREL, A
    JEANDIN, M
    MATERIALS AND MANUFACTURING PROCESSES, 1995, 10 (05) : 1093 - 1099
  • [37] Conductive nanoscopic ion-tracks in diamond-like-carbon
    Zollondz, J. -H.
    Schwen, D.
    Nix, A. -K.
    Trautmann, C.
    Berthold, J.
    Krauser, J.
    Hofsaess, H.
    MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2006, 26 (5-7): : 1171 - 1174
  • [38] Surface modification of chalcogenide glass for diamond-like-carbon coating
    Lee, Jun Ho
    Kim, Hyun
    Lee, Woo Hyung
    Kwon, Min Chul
    Choi, Yong Gyu
    APPLIED SURFACE SCIENCE, 2019, 478 : 802 - 805
  • [39] Frictional properties of diamond-like coatings on spinning steel collar at different temperatures
    Guo, Feifei
    Li, Benyin
    Su, Huiming
    Wang, Kexin
    Cheng, Qizeng
    Cheng, Xiaole
    Qin, Liguo
    Fangzhi Xuebao/Journal of Textile Research, 2024, 45 (07): : 189 - 195
  • [40] DIAMOND AND DIAMOND-LIKE CARBON COATINGS
    OGALE, SB
    KANETKAR, SM
    PATIL, SC
    KULKARNI, A
    PAL, JP
    KARVE, P
    TRANSACTIONS OF THE METAL FINISHERS ASSOCIATION OF INDIA, 1995, 4 (01): : 77 - 90
12345