Frictional and Optical Properties of Diamond-Like-Carbon Coatings on Polycarbonate

被引:0
|
作者
蔺增 [1 ,2 ]
王凤 [3 ]
高丁 [1 ]
巴德纯 [1 ]
刘春明 [2 ]
机构
[1] School of Mechanical Engineering & Automation, Northeastern University
[2] School of Materials & Metallurgy, Northeastern University
[3] Shenyang Aeroengine Research Institute
基金
中国博士后科学基金; 中央高校基本科研业务费专项资金资助;
关键词
diamond-like-carbon films; PECVD; microstructure; frictional and optical properties;
D O I
暂无
中图分类号
TN304.055 [];
学科分类号
摘要
In this work, diamond-like-carbon (DLC) films were deposited onto polycarbonate (PC) substrates by radio-frequency plasma-enhanced chemical vapor deposition (RF PECVD), and silicon films were prepared between DLC and PC substrates by magnetron sputtering deposition so as to improve the adhesion of the DLC films. The deposited films were investigated by means of field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Subsequently, the following frictional and optical properties of the films were measured: the friction coefficient by using a ball-on-disk tribometer, the scratch hardness by using a nano-indenter, the optical transmittance by using a UV/visible spectrometer. The effects of incident power upon the frictional and optical properties of the films were investigated. Films deposited at low incident powers showed large optical gaps, which decreased with increasing incident power. The optical properties of DLC films correlated to the sp 2 content of the coatings. High anti-scratch properties were obtained at higher values of incident power. The anti-scratch properties of DLC films correlated to the sp 3 content of the coatings.
引用
收藏
页码:690 / 695
页数:6
相关论文
共 50 条
  • [21] Evaluation of the Adhesion of Diamond-Like-Carbon Coronary Stent
    Feng Haiquan
    Wang Zhiguo
    Yamashita, Shuzou
    Nakatani, Tatsuyuki
    MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1 AND 2, 2011, 228-229 : 714 - +
  • [22] FRICTIONAL-PROPERTIES OF DIAMOND-LIKE CARBON LAYERS
    ENKE, K
    DIMIGEN, H
    HUBSCH, H
    APPLIED PHYSICS LETTERS, 1980, 36 (04) : 291 - 292
  • [23] Evaluations of diamond-like-carbon film optical constants and their effects on flying height determination
    Li, YF
    Menon, A
    Goglia, P
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (04): : 767 - 773
  • [24] Experimental study of mechanical properties and scratch resistance of ultra-thin diamond-like-carbon (DLC) coatings deposited on glass
    Crombez, R.
    McMinis, J.
    Veerasamy, V. S.
    Shen, W.
    TRIBOLOGY INTERNATIONAL, 2011, 44 (01) : 55 - 62
  • [25] Optical properties of diamond like carbon and diamond like nanocomposite films
    Tamuleviciene, Asta
    Meskinis, Sarunas
    Kopustinskas, Vitoldas
    Tamulevicius, Sigitas
    PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 6, NO 12, 2009, 6 (12): : 2817 - 2819
  • [26] Growth and properties characterization of diamond-like-carbon films by KrF pulsed laser deposition
    Guo, Yanlong
    Cheng, Yong
    Lu, Yimin
    Sun, Bin
    Wang, Shuyun
    Huang, Guojun
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2014, 34 (09): : 970 - 973
  • [27] Photoacoustic investigations of optical absorption, photoluminescence, and thermal diffusivity of Porous Diamond-Like-Carbon films
    Conceiçao, MV
    Nakamura, O
    da Silva, AF
    Santos, LV
    Trava-Airoldi, VJ
    Roman, LS
    JOURNAL DE PHYSIQUE IV, 2005, 125 : 293 - 295
  • [28] Tribological Properties of Diamond-Like Carbon Coatings
    Madej, Monika
    TEROTECHNOLOGY, 2014, 874 : 9 - 15
  • [29] Properties of Diamond Like Carbon Coatings Doped with Silicon
    Milewski, Krystian
    Kowalczyk, Joanna
    Madej, Monika
    Pajak, Michal
    XIII INTERNATIONAL CONFERENCE ELECTROMACHINING 2018, 2018, 2017
  • [30] Properties of nitrogen-doped diamond-like-carbon films prepared by a laser ablation
    Hong, Young Kyu
    Kim, Ju-Jin
    Kim, Jin Seung
    Jeon, Il Cheol
    Park, Chan
    Kim, Jae Ki
    Applied Surface Science, 1999, 146 (01): : 269 - 273