Effect of Rare Earths on Solidification Microstructure and High Temperature Mechanical Property of Sn60-Pb40 Solder alloy

被引:0
|
作者
马鑫
钱乙余
机构
关键词
rare earths; high temperature tensile strength; eutectic growth; microstructure;
D O I
暂无
中图分类号
TG14 [金属材料];
学科分类号
080502 ;
摘要
Trace rare earth elements were used in order to strengthen the Sn60 Pb40 solder alloy. The experimental results show that the high temperature tensile strength of near eutectic Sn60 Pb40 solder alloy is increased by about 70% after adding trace rare earth elements. Analysis shows that the high affinity between rare earth element and Sn leads to the variation of contact angle at the three phase junction of S/L interface during eutectic growth and further changes the Pb concentration at the S/L interface needed for coupled eutectic growth. Thus the eutectic microstructure can directly grow upon the primary Pb rich phase and the formation of coarse Sn rich halo is suppressed. Therefore homogeneous metallurgical microstructure can be obtained.
引用
收藏
页码:289 / 292
页数:4
相关论文
共 50 条
  • [21] Effect of Titanium on Microstructure, Texture, and Mechanical Property of As-Extruded Mg-Sn Alloy
    Yu, Zhengwen
    Zhang, Chang
    Tang, Aitao
    Li, Caiyu
    Liu, Jianguo
    Gao, Zhengyuan
    Pan, Fusheng
    FRONTIERS IN MATERIALS, 2020, 7
  • [22] Effect of rare earth elements on the microstructure and property for magnesium alloy AM60B
    Wang, KK
    Kang, YL
    Zhang, K
    An, L
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2002, 9 (06): : 466 - 469
  • [23] Effect of aging on mechanical properties of high temperature Pb-rich solder joints
    Khatibi, G.
    Kotas, A. Betzwar
    Lederer, M.
    MICROELECTRONICS RELIABILITY, 2018, 85 : 1 - 11
  • [24] Effect of Rare Earth Y on the Microstructure, Mechanical Properties and Friction of Sn-Babbitt Alloy
    Ren, Xiaoyan
    Chang, Yuan
    Chen, Shengsheng
    Chen, Ningning
    Shi, Zhenghua
    Zhang, Yougui
    Chen, Huimin
    Guo, Zhiming
    Hu, Jinzhi
    Zhang, Guowei
    Xu, Hong
    COATINGS, 2024, 14 (10)
  • [25] Effect of Ni Addition to Sn0.7Cu Solder Alloy on Thermal Behavior, Microstructure, and Mechanical Properties
    Yanqing Lai
    Xiaowu Hu
    Xiongxin Jiang
    Yulong Li
    Journal of Materials Engineering and Performance, 2018, 27 : 6564 - 6576
  • [26] Effect of Bi Content on the Microstructure and Mechanical Performance of Sn-1Ag-0.5Cu Solder Alloy
    Zahran, Heba Y.
    Mahmoud, Ashraf S.
    Abd El-Rehim, Alaa F.
    CRYSTALS, 2021, 11 (03)
  • [27] Effect of Ni Addition to Sn0.7Cu Solder Alloy on Thermal Behavior, Microstructure, and Mechanical Properties
    Lai, Yanqing
    Hu, Xiaowu
    Jiang, Xiongxin
    Li, Yulong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (12) : 6564 - 6576
  • [28] Effect of Thermal Exposure on Microstructure and Mechanical Properties of Laser Deposited Ti60A High Temperature Titanium Alloy
    Zhang Ali
    Liu Dong
    Tang Haibo
    Wang Huaming
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (07) : 1686 - 1690
  • [29] Effect of rare earth-La addition on microstructure and mechanical property of powder forged Ti alloy
    Liu, Yan-Bin
    Liu, Yong
    Chen, Yan-Hui
    Zhao, Zhong-Wei
    Wang, Bin
    Liu, Y. (yonliu@csu.edu.cn), 1600, Central South University, Lushan Nanlu, Changsha, 410043, China (19): : 223 - 229
  • [30] Effect of Rare Earths on Fe-Based High Chromium Alloy Powder During Mechanical Milling
    LIU Jun you 1
    2. School of Material and Engine
    Journal of Rare Earths, 2000, (04) : 297 - 297