Characterization of Passive Films Formed on As-received and Sensitized AISI 304 Stainless Steel

被引:5
作者
Yubo Zhang [1 ,2 ,3 ,4 ]
Hongyun Luo [1 ,2 ,3 ]
Qunpeng Zhong [1 ,2 ,3 ]
Honghui Yu [1 ,2 ,3 ]
Jinlong Lv [4 ,5 ]
机构
[1] Key Laboratory of Aerospace Materials and Performance (Ministry of Education), School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics
[2] The Collaborative Innovation Center for Advanced Aero-Engine (CICAAE), Beijing University of Aeronautics and Astronautics
[3] Beijing Key Laboratory of Advanced Nuclear Materials and Physics, Beijing University of Aeronautics and Astronautics
[4] China Waterborne Transport Research Institute
[5] Beijing Key Laboratory of Fine Ceramics, Institute of Nuclear and New Energy Technology, Tsinghua University
关键词
304 stainless steel; Sensitization; Passive films; XPS; Impedance;
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术]; TG142.1 [钢的组织与性能];
学科分类号
080503 ; 080502 ;
摘要
The current research of corrosion resistance of stainless steels mainly focuses on characterization of the passive films by point defect mode and mixed-conduction model. The corrosion resistance of the passive films formed on asreceived and sensitized AISI304 stainless steel in borate bu er solution were evaluated in this paper. The degree of sensitization and corrosion resistance of AISI304 stainless steels was evaluated by double loop electrochemical potentiodynamic reactivation and electrochemical impedance spectroscopy. The passive films formed on the stainless steels were studied by XPS technique. It was found that as-received specimen had higher pitting corrosion potential and corrosion resistance than sensitized one. The Mott-Schottky results showed that sensitized stainless steel had more defects in the passive film than as-received one. The compositions of the passive films were mainly Cr and Fe oxides according to XPS results.
引用
收藏
页码:61 / 72
页数:12
相关论文
共 40 条
[1]  
Passive film growth on carbon steel and its nanoscale features at various passivating potentials[J] . Yuan Li,Y. Frank Cheng.Applied Surface Science . 2017
[2]  
Relationship between constant-phase element (CPE) parameters and physical properties of films with a distributed resistivity[J] . Pedro Córdoba-Torres.Electrochimica Acta . 2017
[3]  
Passivation and electrochemical behavior of 316L stainless steel in chlorinated simulated concrete pore solution[J] . Hong Luo,Huaizhi Su,Chaofang Dong,Xiaogang Li.Applied Surface Science . 2017
[4]  
Corrosion behavior of the oxide films modified with zincizing treatment on AISI 1020 steel[J] . Shenghan Zhang,Rongxue Shi,Yu Tan.Journal of Alloys and Compounds . 2017
[5]  
Study of overall and local electrochemical responses of oxide films grown on CoCr alloy under biological environments[J] . I. Diaz,J.F. Martinez-Lerma,R. Montoya,I. Llorente,M.L. Escudero,M.C. García-Alonso.Bioelectrochemistry . 2017
[6]  
Integrated modeling of second phase precipitation in cold-worked 316 stainless steels under irradiation[J] . Mahmood Mamivand,Ying Yang,Jeremy Busby,Dane Morgan.Acta Materialia . 2017
[7]  
Electrochemical investigation and ab initio computation of passive film properties on copper in anaerobic sulphide solutions[J] . Decheng Kong,Aoni Xu,Chaofang Dong,Feixiong Mao,Kui Xiao,Xiaogang Li,Digby D. Macdonald.Corrosion Science . 2017
[8]  
Effect of immersion time on the passive and electrochemical response of annealed and nano-grained commercial pure titanium in Ringer’s physiological solution at 37<ce:hsp sp="0.25"/>°C[J] . Arash Fattah-alhosseini,Ali Reza Ansari,Yousef Mazaheri,Mohsen K. Keshavarz.Materials Science & Engineering C . 2017
[9]  
The bi-layer structure and the higher compactness of a passive film on nanocrystalline 304 stainless steel[J] . Y. Gui,Z.J. Zheng,Y. Gao.Thin Solid Films . 2016
[10]  
Stability of type 310S stainless steel bipolar plates tested at various current densities in proton exchange membrane fuel cells[J] . Masanobu Kumagai,Seung-Taek Myung,Yasuyuki Katada,Hitoshi Yashiro.Electrochimica Acta . 2016