Calibration of split Hopkinson pressure bar system with special shape striker

被引：0
|
作者：
周子龙 [1 ]
洪亮 [2 ]
李启月 [1 ]
刘志祥 [1 ]
机构：
[1] School of Resources and Safety Engineering,Central South University
[2] Department of Civil Engineering,Hunan City University
来源：
JournalofCentralSouthUniversityofTechnology | 2011年 / 18卷 / 04期
基金：
中国国家自然科学基金;
关键词：
split Hopkinson pressure bar; special shape striker; system calibration; misalignment impact;
D O I：
暂无
中图分类号：
TD313 [岩石力学性质];
学科分类号：
0819 ;
摘要：
In order to present basic guidance for system calibration of split Hopkinson pressure bar(SHPB) with the special shape striker,wave characteristics and dynamic responses of SHPB under striker impact were analyzed.Stress generated by the special shape striker tends to have a half-sine waveform and has little wave dispersion during its propagation.Impact velocities of the special shape striker and peak values of generated stress still have linear relation but with a different coefficient from that of cylindrical strikers.From stress histories on the surfaces of the input bar impacted by the special shape striker off-axially and obliquely,it is found that the misalignment impacts usually trigger wave distortion and amplitude decrease,which can be used to identify the poor system adjustment.Finally,the system calibration of SHPB with the special shape striker can be classified into four steps:system adjustment,wave distortion identification,measurement calibration and transmission calibration,where the measurement calibration factor and transmission calibration factor are elaborated and redefined.
引用
收藏
页码：1139 / 1143
页数：5
相关论文
共 50 条
  • [1] Calibration of split Hopkinson pressure bar system with special shape striker
    Zhou Zi-long
    Hong Liang
    Li Qi-yue
    Liu Zhi-xiang
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2011, 18 (04): : 1139 - 1143
  • [2] Calibration of split Hopkinson pressure bar system with special shape striker
    Zi-long Zhou
    Liang Hong
    Qi-yue Li
    Zhi-xiang Liu
    Journal of Central South University of Technology, 2011, 18 : 1139 - 1143
  • [3] The effect of sabot mass on the striker bar for split Hopkinson pressure bar experiments
    M. J. Forrestal
    D. J. Frew
    W. Chen
    Experimental Mechanics, 2002, 42 : 129 - 131
  • [4] The effect of sabot mass on the striker bar for split Hopkinson pressure bar experiments
    Forrestal, MJ
    Frew, DJ
    Chen, W
    EXPERIMENTAL MECHANICS, 2002, 42 (02) : 129 - 131
  • [5] Split Bar Hopkinson with Springs Striker Bar Launcher
    Pramono, Agus Sigit
    Sujarwanto
    Rivazani, Handik
    ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 383 - 387
  • [6] Controlled multipulse loading with a stuffed striker in classical split Hopkinson pressure bar testing
    Xia, K.
    Chen, R.
    Huang, S.
    Luo, S. N.
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2008, 79 (05):
  • [7] Restrain effect of hollow cone striker bar on incident pulse dispersion of split hopkinson pressure bar
    Zou, Guang-Ping
    Wang, Xin-Zheng
    Chen, Jian-Jie
    Chang, Zhong-Liang
    Binggong Xuebao/Acta Armamentarii, 2012, 33 (11): : 1346 - 1351
  • [8] A Method of Restraining the Geometric Dispersion Effect on Split-Hopkinson Pressure Bar by the Modified Striker Bar
    G. P. Zou
    X. H. Shen
    Z. L. Chang
    Y. W. Wang
    P. Wang
    Experimental Techniques, 2016, 40 : 1249 - 1261
  • [9] A Method of Restraining the Geometric Dispersion Effect on Split-Hopkinson Pressure Bar by the Modified Striker Bar
    Zou, G. P.
    Shen, X. H.
    Chang, Z. L.
    Wang, Y. W.
    Wang, P.
    EXPERIMENTAL TECHNIQUES, 2016, 40 (04) : 1249 - 1261
  • [10] Influence of Imperfect Position of a Striker and Input Bar on Wave Propagation in a Split Hopkinson Pressure Bar (SHPB) Setup with a Pulse-Shape Technique
    Panowicz, Robert
    Konarzewski, Marcin
    APPLIED SCIENCES-BASEL, 2020, 10 (07):
12345