Effects of Chemical Reaction Caused by Cooling Stream on Film Cooling Effectiveness

被引:0
作者
Keyong Cheng Shiqiang Liang Xiulan Huai Wei Chen Yongxian Guo Institute of Engineering Thermophysics Chinese Academy of Sciences Beijing China Graduate University of Chinese Academy of Sciences Beijing China School of Mechanoelectronic Engineering Xidian University Xian Shaanxi China [1 ,2 ,1 ,1 ,1 ,2 ,1 ,3 ,1 ,100190 ,2 ,100049 ,3 ,710071 ]
机构
关键词
Gas turbine; Film cooling; Chemical reaction; Heat transfer; Numerical simulation;
D O I
暂无
中图分类号
TK471 [理论];
学科分类号
080704 ;
摘要
With the increase of inlet temperature of gas turbines, the benefits by using the conventional methods are likely to approach their limits. Therefore, it is essential to study novel film cooling methods for surpassing these current limits. Based on the theory of heat transfer enhancement, a film cooling method with chemical reaction by cool- ing stream is proposed. In order to test the feasibility of the proposed method, numerical simulations have been conducted. The classic flat plate structure with a 30 degree hole is used for the simulation. In the present study, the effects of the parameters in relation to the chemical reaction on film cooling effectiveness, such as chemical heat sink, volume changes, and reaction rate, are investigated numerically. The conventional film cooling is also calculated for the comparison. The results show that film cooling effectiveness is improved obviously due to the chemical reaction, and the reaction heat and reaction rate of cooling stream have an important effect on film ef- fectiveness. However, the effect of volume changes can be ignored.
引用
收藏
页码:60 / 65
页数:6
相关论文
共 17 条
[1]  
Comparison of Film Effectiveness and Cooling Uniformity of Conical and Cylindrical-shaped Film Hole with Coolant-exit Temperature Correction. C. Q. Nguyen,P. L. Johnson,B. C. Bernier. Journal of Thermal Science and Engeering Application . 2011
[2]  
Simulation of Film Cooling Enhancement with Mist Injection. X. Li,T. Wang. Journal of Heat Transfer . 2006
[3]  
Influence of Near Hole Pressure Fluctuation on the Thermal Protection of a Film-cooled Flat Plate. A. Burdet,R. S. Abhari. Journal of Heat Transfer . 2009
[4]  
Large-Eddy Simulation of Double-row Compound-angle Film Cooling: Setup and Validation. L. Graf,L. Kleiser. Computers and Fluids . 2011
[5]  
Conjugate Heat Transfer Analysis for Film Cooling Configurations with Different Hole Geomeries. Bohn D E,Ren J,Kusterer K. ASME Paper 03-GT-38369 . 2003
[6]  
A Parametric Study on the Effect of Sister Hole Location on Active Film-cooling. M. J. Ely,B. A. Jubran. GT-22060 . 2010
[7]  
Film Cooling Effectiveness and Net Heat Flux Reduction of Advanced Cooling Schemes Using Thermochromic Liquid Crystal. M. G. Ghorab. Applied Thermal Engineering . 2011
[8]  
Film Cooling From a Row of Holes Supplemented With Anti-Vortex Holes. lok D,Yiping L,Wynn P,et al. Pro ceedings of GT2007 . 2007
[9]  
A novel anti-vortex turbine filmcooling hole concept. Heidmann J D,Ekkad S. ASME GT-2007-27528 . 2007
[10]   A novel concept for convective heat transfer enhancement [J].
Guo, ZY ;
Li, DY ;
Wang, BX .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (14) :2221-2225