Actuator line simulation of a tidal turbine in straight and yawed flows

被引：17

作者：

Baratchi, F. ^{[1
]}

Jeans, T.L. ^{[1
]}

Gerber, A.G. ^{[1
]}

机构：

[1] Mechanical Department, University of New Brunswick, Fredericton,NB, Canada

来源：

International Journal of Marine Energy | 2017年 / 19卷

基金：

加拿大自然科学与工程研究理事会;

关键词：

Actuator disks - Program processors - Numerical methods - Turbines - Wakes - Computational fluid dynamics - Turbomachine blades;

D O I：

10.1016/j.ijome.2017.08.003

中图分类号：

学科分类号：

摘要：

In this numerical study a tidal turbine in straight and yawed flows is simulated using the actuator line (AL) method coupled with Large Eddy Simulation (LES) of turbulence for the turbine previously studied experimentally by Bahaj et al. (2007). Importantly, the AL model is fully coupled to an existing GPU based computational fluid dynamic solver, enabling high resolution simulations in reasonable time frames using desktop size server systems. Simulation results using the blade element actuator disk (BEAD) method are also presented to support the results from the AL method and highlight its advantages over the BEAD method. Results obtained from this study show that the AL method is capable of capturing wake unsteadiness and the tip and root vortices resulting from the turbine blades. Predicted power and thrust coefficients agree well with experimental data, being within 0.77% and 1.91%, respectively, at the design tip speed ratio. However, the absence of hub geometry in this method affects the downstream wake pattern along its centerline. © 2017 Elsevier Ltd. All rights reserved.

引用

页码：235 / 255