Regularization fast multipole boundary element method for potential flow problems in 3d vortex method

被引：0

作者：

Zhai, Jie ^{[1
,2
]}

Zhu, Baoshan ^{[1
]}

Cao, Shuliang ^{[1
]}

机构：

[1] State Key Laboratory of Hydro Science Engineering, Tsinghua University

[2] Department of Thermal Engineering, Tsinghua University

来源：

WIT Transactions on Modelling and Simulation | 2014年 / 56卷

关键词：

Bem; Fmm; Potential problem; Regularization algorithm;

D O I：

10.2495/BEM360361

中图分类号：

学科分类号：

摘要：

The boundary element method (BEM) is one way for solving the normal flow boundary conditions (potential flow problem) and the pressure distribution in numerical simulation of the three-dimensional vortex method. Because the problem can be reduced from a three-dimensional integral to a two-dimensional integral by BEM, this method is acclaimed in this study. BEM in engineering calculations already has a good application, but with the increasing number of grid problems, the dense matrix generated in the conventional boundary element method (CBEM) is increasing sharply. The fast multipole method (FMM) is introduced to accelerate the computational efficiency and speed of BEM. The three-dimensional vortex method requires solving the velocity and the velocity gradient of potential flow by BEM, and then it will encounter strongly singular integrals. The semi-analytical integral regularization algorithm is applied for solving strongly singular integrals in this paper. The regularization fast multipole boundary element method (FMBEM) is applied to the potential problem of flow over a single sphere, and analyze the results to prove the reliability and efficiency of this method. The calculation parameters which are selected by comparing the influences of them in the single sphere problem are applied to the potential problem of flow over multi-spheres, and the results are analyzed. © 2013 WIT Press.

引用

页码：445 / 456

页数：11

共 10 条

[1]

Gharakhani A., Ghoniem A.F., BEM solution of the 3D internal Neumann problem and a regularized formulation for the potential velocity gradients, International Journal For Numerical Methods In Fluids, 24, 1, pp. 81-100, (1998)

[2]

Liu Y., Rudolphi T., Some identities for fundamental solutions and their applications to weakly-singular boundary element formulations, Engineering Analysis With Boundary Elements, 8, 6, pp. 301-311, (1991)

[3]

Liu Y.J., Nishimura N., The fast multipole boundary element method for potential problems: A tutorial, Engineering Analysis With Boundary Elements, 30, 5, pp. 371-381, (2006)

[4]

Liu Y., Fast multipole boundary element method: Theory and applications in engineering [M], Cambridge University Press, (2009)

[5]

Ruiying C., Et al., Boundary element method theory and application (in Chinese) [M], Jiangsu Science and Technology Press, (1996)

[6]

Mukherjee S., CPV and HFP integrals and their applications in the boundary element method, International Journal of Solids and Structures, 37, 45, pp. 6623-6634, (2000)

[7]

Greengard L., Rokhlin V., A new version of the fast multipole method for the Laplace equation in three dimensions, Acta Numerica, 6, 1, pp. 229-269, (1997)

[8]

Huan-Lin Z., Zhong-Rong N., Xiu-Xi W., Regularization of Nearly Singular Integrals in the Boundary Element Method for 3D Potential Problems, Chinese Journal of Computational Physics, 22, 6, (2005)

[9]

Huan-Lin Z., Zhong-Rong N., Xiu-Xi W., Regularization of Nearly Singular Integrals in the Boundary Element Method of Potential Problems, Applied Mathematics and Mechanics, 24, 10, pp. 1069-1074, (2003)

[10]

Yasuda Y., Higuchi K., Oshima T., Et al., Efficient technique in low-frequency fast multipole boundary element method for plane-symmetric acoustic problems, Engineering Analysis With Boundary Elements, 36, 10, pp. 1493-1501, (2012)

← 1 →