Surface Modification for Lithium Sulfur Batteries

被引：0

作者：

Wen Z. ^{[1
]}

Jin J. ^{[1
]}

Gu S. ^{[1
]}

Ma G. ^{[1
]}

机构：

[1] Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai

来源：

Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society | 2017年 / 45卷 / 10期

关键词：

Lithium anode; Lithium sulfur batteries; Modification; Separator; Sulfur cathode;

D O I：

10.14062/j.issn.0454-5648.2017.10.01

中图分类号：

学科分类号：

摘要：

Owing to the high theoretical energy density, natural abundance, and low cost, lithium sulfur battery becomes a promising candidate for the next generation rechargeable secondary batteries. However, the commercialization of lithium sulfur battery is inhibited by the insulating nature of sulfur and Li2S, "shuttle effect" caused by the soluble polysulfides in organic electrolyte as well as volume change during the charge/discharge process. In recent years, the performance of lithium sulfur battery was improved significantly by designing the structure of electrode materials, modifying the surface and optimizing the electrolyte. This paper summarizes the research progress in the interface modification of sulfur cathode, separator and lithium metal electrode of lithium-sulfur battery. © 2017, Editorial Department of Journal of the Chinese Ceramic Society. All right reserved.

引用

页码：1367 / 1381

页数：14

共 110 条

[31]

Shaibani M., Akbari A., Sheath P., Et al., Suppressed polysulfide crossover in Li-S batteries through a high-flux graphene oxide membrane supported on a sulfur cathode, ACS Nano, 10, 8, pp. 7768-7779, (2016)

[32]

Xiao Z., Yang Z., Wang L., Et al., A lightweight TiO<sub>2</sub>/graphene interlayer, applied as a highly effective polysulfide absorbent for fast, long-life lithium-sulfur batteries, Adv Mater, 27, 18, pp. 2891-2898, (2015)

[33]

Hua W., Yang Z., Nie H., Et al., Polysulfide-scission reagents for the suppression of the shuttle effect in lithium-sulfur batteries, ACS Nano, 11, 2, pp. 2209-2218, (2017)

[34]

Zhang K., Li J., Li Q., Et al., Improvement on electrochemical performance by electrodeposition of polyaniline nanowires at the top end of sulfur electrode, Appl Surf Sci, 285, pp. 900-906, (2013)

[35]

Ma G., Wen Z., Jin J., Et al., Enhanced cycle performance of Li-S battery with a polypyrrole functional interlayer, J Power Sources, 267, pp. 542-546, (2014)

[36]

Niu S., Lv W., Zhou G., Et al., Electrostatic-spraying an ultrathin, multifunctional and compact coating onto a cathode for a long-life and high-rate lithium-sulfur battery, Nano Energy, 30, pp. 138-145, (2016)

[37]

Yu M., Wang A., Tian F., Et al., Dual-protection of a graphene-sulfur composite by a compact graphene skin and an atomic layer deposited oxide coating for a lithium-sulfur battery, Nanoscale, 7, 12, pp. 5292-5298, (2015)

[38]

Jin J., Wen Z., Wang Q., Et al., Protected sulfur cathode with mixed conductive coating layer for lithium sulfur battery, JOM, 68, 10, pp. 2601-2606, (2016)

[39]

Kim J.H., Choi J., Seo J., Et al., Two-dimensional Nafion nanoweb anion-shield for improved electrochemical performances of lithium- sulfur batteries, J Mater Chem A, 4, 29, pp. 11203-11206, (2016)

[40]

Su Y.S., Manthiram A., Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer, Nat Commun, 3, 6, (2012)

← 1 2 3 4 5 6 7 8 9 10 →