Noncontact Wearable Wireless ECG Systems for Long-Term Monitoring

被引:77
作者
Majumder S. [1 ]
Chen L. [1 ]
Marinov O. [1 ]
Chen C.-H. [1 ]
Mondal T. [2 ]
Jamal Deen M. [1 ]
机构
[1] Department of Electrical and Computer Engineering, McMaster University, Hamilton, L8S 4K1, ON
[2] Department of Pediatrics, McMaster University, Hamilton, L8S 4K1, ON
基金
加拿大创新基金会; 加拿大自然科学与工程研究理事会;
关键词
Capacitive coupling; ECG sensors; flexible electrodes; wearable ECG sensing system;
D O I
10.1109/RBME.2018.2840336
中图分类号
学科分类号
摘要
Electrocardiography (ECG) is the most common and extensively used vital sign monitoring method in modern healthcare systems. Different designs of ambulatory ECG systems were developed as alternatives to the commonly used 12-lead clinical ECG systems. These designs primarily focus on portability and user convenience, while maintaining signal integrity and lowering power consumption. Here, a wireless ECG monitoring system is developed using flexible and dry capacitive electrodes for long-term monitoring of cardiovascular health. Our capacitive-coupled dry electrodes can measure ECG signals over a textile-based interface material between the skin and electrodes. The electrodes are connected to a data acquisition system that receives the raw ECG signals from the electrodes and transmits the data using Bluetooth to a computer. A software application was developed to process, store, and display the ECG signal in real time. ECG measurements were obtained over different types of textile materials and in the presence of body movements. Our experimental results show that the performance of our ECG system is comparable to other reported ECG monitoring systems. In addition, to put this research into perspective, recent ambulatory ECG monitoring systems, ECG systems-on-chip, commercial ECG monitoring systems, and different state-of-the-art ECG systems are reviewed, compared, and critically discussed. © 2008-2011 IEEE.
引用
收藏
页码:306 / 321
页数:15
相关论文
共 117 条
[81]  
Wang T.-Y., Lai M.-R., Twigg C.M., Peng S.-Y., A fully reconfigurable low-noise biopotential sensing amplifier with 1. 96 noise efficiency factor, IEEE Trans. Biomed. Circuits Syst., 8, 3, pp. 411-422, (2014)
[82]  
Tseng Y., Ho Y., Kao S., Su C., A 0. 09 ?W low power frontend biopotential amplifier for biosignal recording, IEEE Trans. Biomed. Circuits Syst., 6, 5, pp. 508-516, (2012)
[83]  
Yazicioglu R.F., Kim S., Torfs T., Kim H., Van Hoof C., A 30?W analog signal processor ASIC for portable biopotential signal monitoring, IEEE J. Solid-State Circuits, 46, 1, pp. 209-223, (2011)
[84]  
Searle A., Kirkup L., A direct comparison of wet, dry and insulating bioelectric recording electrodes, Physiological Meas., 21, 2, pp. 271-283, (2000)
[85]  
Liu X., Et al., A 457-nW cognitive multi-functional ECG processor, Proc. IEEE Asian Solid-State Circuits Conf., pp. 141-144, (2013)
[86]  
Muller R., Gambini S., Rabaey J.M., A 0. 013mm2 5?W DCcoupled neural signal acquisition IC with 0. 5V supply, Proc. 2011 IEEE Int. Solid-State Circuits Conf., pp. 302-304, (2012)
[87]  
Becchetti C., Neri A., Medical Instrument Design and Development: From Requirements to Market Placements, (2013)
[88]  
Degen T., Jackel H., A pseudo-differential amplifier for bioelectric events with DC-Offset compensation using two-wired amplifying electrodes, IEEE Trans. Biomed. Eng., 53, 2, pp. 300-310, (2006)
[89]  
Harrison R., A low-power, low-noiseCMOSamplifier for neural recording applications, Proc. IEEE Int. Symp. Circuits Syst., 5, pp. 197-200, (2002)
[90]  
Yoo J., Et al., An 8-channel scalable EEG acquisition SoC with fully integrated patient-specific seizure classification and recording processor, Proc. IEEE Int. Solid-State Circuits Conf., pp. 292-294, (2012)