Dynamic Recrystallization Behavior of 13%Cr Martensitic Stainless Steel under Hot Working Condition

被引：49

作者：

Ebrahimi, G.R. ^{[1
]}

Keshmiri, H. ^{[2
]}

Maldad, A.R. ^{[2
]}

Momeni, A. ^{[3
]}

机构：

[1] Metallurgical and Materials Engineering Department, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran

[2] Department of Materials Engineering, Sabzevar Tarbiat Moallem University, Sabzevar 9617976487, Iran

[3] Materials Science and Engineering Department, Hamedan University of Technology, Hamedan 6516913418, Iran

来源：

Journal of Materials Science and Technology | 2012年 / 28卷 / 05期

关键词：

Martensitic stainless steel - Deformation - Hot working - Strain rate - Activation energy - Strain hardening;

D O I：

10.1016/S1005-0302(12)60084-X

中图分类号：

学科分类号：

摘要：

In this study, the effect of hot deformation on martensitic stainless steel was carried out in temperatures between 950 to 1100 °C and strain rates of 0.001, 0.01 and 0.1 s-1. Two important dynamic recrystallization parameters, the critical strain and the point of maximum dynamic softening, were derived from strain hardening rate vs stress curves. Then the calculated parameters were used to predict the dynamic recrystallized fraction. Our results show that critical stress and strain increase with decreasing deformation temperature and increasing strain rate. The hot deformation activation energy of the steel is also investigated in the present work with 413 kJ/mol. Our experimental flow curves are in fair agreement with the kinetics of dynamic recrystallization model. © 2012 The Chinese Society for Metals.

引用

页码：467 / 473