Numerical analysis on interface damage mechanisms of 3D four-directional braided composites

被引：0

作者：

Zhang C. ^{[1
]}

Zhou Y. ^{[2
]}

Yang Z. ^{[1
]}

Xu X. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Jiangsu University, Zhenjiang

[2] Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2016年 / 33卷 / 09期

关键词：

3D four-directional braiding; Composites; Damage mechanisms; Interface; Numerical analysis;

D O I：

10.13801/j.cnki.fhclxb.20151106.004

中图分类号：

学科分类号：

摘要：

Considering the effect on material interfacial mechanical properties caused by friction which appears on the debonding interface under compression stress, a damage-friction combination interface constitutive model was proposed. Then a user material subroutine VUMAT involved this constitutive model was developed and implemented in finite element software ABAQUS. In conjunction with the damage-friction interface combination constitutive model, a meso finite element model of 3D four-directional braided composites based on the periodic unit-cell was established. In the unit-cell model, the interface element was introduced in the yarn/matrix and yarn/yarn interfaces. The initiation and propagation of interface damage under typical loads were simulated, and the mechanisms of interface stress transfer and interface failure were revealed. The effect rule of interface properties on macro- and micro- mechanical properties of composites were studied, which provides a reference for optimizing design and control of the interface performance of 3D four-directional braided composites. © 2016, BUAA Culture Media Group Ltd. All right reserved.

引用

页码：1989 / 1998

页数：9

共 21 条

[1]

Yang J.M., Ma C.L., Chou T.W., Fiber inclination model of three dimensional textile structural composites, Journal of Composite Materials, 20, 5, pp. 472-484, (1986)

[2]

Chen L., Tao X.M., Choy C.L., On the microstructure of three-dimensional braided preforms, Composites Science and Technology, 59, 3, pp. 391-404, (1999)

[3]

Wang Y.Q., Sun X.K., Digital-element simulation of textile processes, Composites Science and Technology, 61, 2, pp. 311-319, (2001)

[4]

Xu K., Xu X.W., Prediction of elastic constants and simulation of stress field of 3D braided composites based on the finite element method, Acta Materiae Compositae Sinica, 24, 3, pp. 178-185, (2007)

[5]

Xu K., Xu X.W., Finite element analysis of mechanical properties of 3D five-directional braided composites, Materials Science and Engineering A, 487, 1-2, pp. 499-509, (2008)

[6]

Fang G.D., Liang J., Wang Y., Et al., The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites, Composites Part A: Applied Science and Manufacturing, 40, 4, pp. 343-350, (2009)

[7]

Li D.S., Fang D.N., Jiang N., Et al., Finite element modeling of mechanical properties of 3D five-directional rectangular braided composites, Composites Part B: Engineering, 42, 6, pp. 1373-1385, (2011)

[8]

Zhang C., Xu X.W., Finite element analysis of 3D braided composites based on three unit-cell models, Composite Structures, 98, 3, pp. 130-142, (2013)

[9]

Zeng T., Wu L.Z., Guo L.C., A finite element model for failure analysis of 3D braided composites, Materials Science and Engineering A, 366, 1, pp. 144-151, (2004)

[10]

Fang G.D., Liang J., Wang B.L., Progressive damage and nonlinear analysis of 3D four-directional braided composites under unidirectional tension, Composite Structures, 89, 1, pp. 126-133, (2009)

← 1 2 3 →