Simulation analysis of vibro-acoustic characteristics of traditional Guzheng

被引：0

作者：

Deng X. ^{[1
]}

Yu Z. ^{[1
]}

Yao W. ^{[1
]}

Chen M. ^{[2
]}

机构：

[1] Department of Engineering Mechanics, Shanghai Jiaotong University, Shanghai

[2] Shanghai National Musical Instrument Factory, Shanghai

来源：

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2016年 / 50卷 / 02期

关键词：

Finite element model (FEM); Structure design; Traditional Guzheng; Vibro-acoustic;

D O I：

10.16183/j.cnki.jsjtu.2016.02.024

中图分类号：

学科分类号：

摘要：

Based on the vibro-acoustic principle, the simplified model of traditional Guzheng was proposed. A 3-D finite element model (FEM) of the Guzheng structure was established to analyze the vibration frequency response with the force of the strings and bridge acting on the panel as the vibration condition. The acoustic FEM and its analysis were established with vibration frequency response as the acoustic boundary conditions, and the frequency response characteristics of radiated sound pressure were obtained. The results show that the simulation results of Guzheng vibration are consistent with the experiment while the peak frequency of the radiated sound pressure of Guzheng is consistent with the simulation results. The acoustic radiation efficiency between 350 and 550 Hz is higher than that before 350 Hz. The upward acoustic radiation of Guzheng vibration is stronger than the downward one. © 2016, Editorial Board of Journal of Shanghai Jiao Tong University. All right reserved.

引用

页码：300 / 305

页数：5

共 10 条

[1]

Chen T., Zheng M., Cai X., The acoustic characteristics of the pipa, Chinese Journal of Acoustics, 20, 1, pp. 60-65, (1995)

[2]

Wang Z., Fan W., The structure,principle and design modeling of Guzheng, Journal of Donghua University, 38, 5, pp. 564-571, (2012)

[3]

Li Y., Mechanical analysis of dulcimer chord vibration, Journal of Qingdao Technological University, 29, 3, pp. 84-86, (2008)

[4]

Shorter P.J., Langley R.S., Vibro-acoustic analysis of complex systems, Journal of Sound and Vibration, 288, 3, pp. 669-699, (2005)

[5]

Vergote K., Van Genechten B., Vandepitte D., Et al., On the analysis of vibro-acoustic systems in the mid-frequency range using a hybrid deterministic-statistical approach, Computers and Structures, 89, 11-12, pp. 868-877, (2011)

[6]

Yang D., Wang D., Liu H., Numerical analysis of vibro-acoustic characters of ship, Journal of Shanghai Jiaotong University, 36, 11, (2002)

[7]

Jin X., Bai S., Computer simulation on acoustic contribution of vibrating body panels, Automotive Engineering, 22, 4, pp. 235-239, (2000)

[8]

Zeng Z., Shao R., Numerical analysis of vibro-acoustic characters of gear structure, Science Technology and Engineering, 7, 12, pp. 2950-2952, (2007)

[9]

Han B., Acoustics system of musical instruments and musical acoustics of space, Entertainment Technology, 2, pp. 64-68, (2007)

[10]

Obataya E., Ono T., Norimoto M., Vibrational properties of wood along the grain, Journal of Materials Science, 35, pp. 2993-3001, (2000)

← 1 →