Experiment study on mechanical properties of bedding shale in Lower Silurian Longmaxi shale Southeast Chongqing

被引：0

作者：

Yao, Guanghua ^{[1
,2
,3
]}

Chen, Qiao ^{[4
]}

Liu, Hong ^{[2
]}

Tan, Yanhu ^{[4
]}

Wang, Lisha ^{[4
]}

Du, Hongyu ^{[2
]}

Zhu, Honglin ^{[4
]}

机构：

[1] State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu, 610059, Sichuan

[2] Chongqing Key Laboratory of Exogenic Mineralization and Mine Environment Chongqing Institute of Geology and Mineral Resource, Chongqing

[3] Chongqing Mineral Resources Development Company, Chongqing

[4] Research Center of Shale Gas Development Technology, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Science, Chongqing

来源：

Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering | 2015年 / 34卷

关键词：

Angle of bedding; Anisotropy; Lower Silurian Longmaxi Southeast Chongqing; Rock mechanics; Shale;

D O I：

10.13722/j.cnki.jrme.2014.0670

中图分类号：

学科分类号：

摘要：

We tested basic physical characteristics of the outcrop samples with developed beddings from the Lower Silurian Longmaxi in Southeast Chongqing. Based on these tests, we carried out the research of shale mechanical characteristics under the different bedding angle conditions. Our tests indicate that the uniaxial compressive strength of shale increases linearly with the increase of the bedding angle of the samples. The extending direction of failure surface is consistent with the bedding angle when the angle is between 0°-45°. While the angel ranges from 60° to 90°, only a partial consistency between the crack distribution and angle of bedding was reached. Rock will produce the splitting failure because of the inconformity between the main failure surface extension and the angle of bedding. The tensile strength of samples range from 2.872 0 MPa to 10.490 0 MPa, and the stiffness 556.62-1 842.98 MPa, which shows wide dispersion. when the angle between core drilling direction and layers changes the mechanical properties of shale vary greatly., we should take into account the anisotropic of mechanical characteristics during the designs of drilling and fracturing of shale gas. ©, 2015, Academia Sinica. All right reserved.

引用

页码：3313 / 3319

页数：6

共 21 条

[1]

Wang S., Shale gas exploration and appraisal in China: Problems and discussion, Nature Gas Industry, 33, 12, pp. 13-29, (2013)

[2]

Han S., Zhang J., Xing Y., Et al., Shale gas accumulation conditions and resource potential of the Lower Silurian Longmaxi Formation in southeast Chongqing, Journal of China Coal Society, 38, pp. 168-173, (2013)

[3]

Wang S., Liu H., Chen Q., Et al., Physical and chemical properties experiment on shale in Longmaxi Formation of Lower Silurian, southeast Chongqing, Acta Petrolei Sinica, 35, 2, pp. 245-252, (2014)

[4]

Zou C., Dong D., Wang S., Et al., Geological characteristics, formation mechanism and resource potential of shale gas in China, Petroleum Exploration and Development, 37, 6, pp. 641-653, (2010)

[5]

Zhang J., Lin L., Li Y., Et al., The method of shale gas assessment: Probability volume method, Earth Science Frontiers, 19, 2, pp. 184-191, (2012)

[6]

Wang H., Liu Y., Dong D., Et al., Scientific issues on effective development of marine shale gas in southern China, Petroleum Exploration and Develpoment, 40, 5, pp. 574-579, (2013)

[7]

Wang H., Zhang D., Zhang D., Et al., Drilling technologies on shale gas in Weiyuan structure, Drilling and Production Technologies, 35, 2, pp. 9-11, (2012)

[8]

Sondergeld C.H., Ral C.S., Elastic anisotropy of shales, The Leading Edge, 30, 3, pp. 324-331, (2011)

[9]

Zhu Y.P., Liu E., Martinez A., Et al., Understanding geophysical responses of shale-gas plays, The Leading Edge, 30, 3, pp. 332-337, (2011)

[10]

Rickman R., Mullen M., Petre E., Et al., A practical use of shale petrophysics for stimulation design optimization: All shale plays are not clones of the Barnett Shale, SPE Annual Technical Conference and Exhibition, pp. 1-11, (2008)

← 1 2 3 →