The precise modeling and analysis of demodulation approach in self-sensing active magnetic bearings

被引：0

作者：

Yu J. ^{[1
]}

Zhu C. ^{[1
]}

Yu Z. ^{[1
]}

机构：

[1] College of Electrical Engineering, Zhejiang University, Hangzhou, 310027, Zhejiang Province

来源：

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2016年 / 36卷 / 21期

基金：

中国国家自然科学基金;

关键词：

Analytical model; Displacement demodulator; Dynamic coil current; Jacobi-Anger identity; Self-sensing active magnetic bearing;

D O I：

10.13334/j.0258-8013.pcsee.152443

中图分类号：

学科分类号：

摘要：

The key point of realizing self-sensing active magnetic bearing is to extract rotor displacement information from coil current signal accurately. Affected by the variation of switching power amplifier's pulse width modulation (PWM) duty cycle and rotor position, the coil current has complex and time-varying frequency spectrum. Former analysis and compensation methods of the switching harmonics demodulation type self-sensing active magnetic bearings are mainly based on a completely ideal rotor displacement demodulator model, so that it is difficult to precisely analyze the real demodulator's output property. By utilizing the cosine Fourier series of the absolute value function and Jacobi-Anger identity, we established the frequency domain analytical model of each part of the self-sensing demodulator under static and dynamic coil current. Then the model is validated by experiment on a 4-DOF radial active magnetic bearing rigid rotor system platform. It is shown that the output of the demodulator under static coil current is the constant value which is proportional to air gap of active magnetic bearing. While the demodulator's output under dynamic coil current includes three components, whose amplitude and distribution in frequency domain depend on the rotor position and the PWM duty cycle's change of power amplifier. © 2016 Chin. Soc. for Elec. Eng.

引用

页码：5939 / 5946

页数：7

共 23 条

[1]

Schweitzer G., Maslen E.H., Magnetic Bearings: Theory, Design, and Application to Rotating Machinery, pp. 1-26, (2009)

[2]

Zhu H., Ju J., Development of three-pole magnetic bearings and key technologies, Proceedings of the CSEE, 34, 9, pp. 1360-1367, (2014)

[3]

Zhang W., Zhu H., Yuan Y., Study on key technologies and applications of magnetic bearings, Transactions of China Electrotechnical Society, 30, 12, pp. 12-20, (2015)

[4]

Vischer D., Bleuler H., Self-sensing active magnetic levitation, IEEE Transactions on Magnetics, 29, 2, pp. 1276-1281, (1993)

[5]

Thibeault N.M., Smith R.S., Magnetic bearing measurement configurations and associated robustness and performance limitations, Journal of Dynamic Systems, Measurement, and Control, 124, 4, pp. 589-598, (2002)

[6]

Park Y.H., Han D.C., Park I.H., Et al., A self-sensing technology of active magnetic bearings using a phase modulation algorithm based on a high frequency voltage injection method, Journal of Mechanical Science and Technology, 22, 9, pp. 1757-1764, (2008)

[7]

Wang J., Xu L., Detection and research of the rotor displacement of self-sensing magnetic bearing, Mechanical Engineering and Automation, 1, (2005)

[8]

Van Schoor G., Niemann A.C., Du Rand C.P., Evaluation of demodulation algorithms for robust self-sensing active magnetic bearings, Sensors and Actuators A: Physical, 189, 1, pp. 441-450, (2013)

[9]

Schammass A., Herzog R., Buhler P., Et al., New results for self-sensing active magnetic bearings using modulation approach, IEEE Transactions on Control Systems Technology, 13, 4, pp. 509-516, (2005)

[10]

Tang M., Zhu C.S., Yu J., Self-sensing active magnetic bearing using real-time duty cycle, Journal of Zhejiang University Science C, 14, 8, pp. 600-611, (2013)

← 1 2 3 →