Theoretical and experimental study on laser rotary grooving for 40Cr bar low-stress shearing

被引：1

作者：

Dong Y. ^{[1
]}

Zhao S. ^{[1
]}

Cui M. ^{[1
]}

Huo Q. ^{[1
]}

Ren Y. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an

来源：

Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2016年 / 50卷 / 11期

关键词：

Annular groove; Laser rotary grooving; Low-stress shearing; Metallic bar;

D O I：

10.7652/xjtuxb201611019

中图分类号：

学科分类号：

摘要：

A laser rotary grooving method on metal bar for low-stress shearing was developed to improve the precision of billets. A mathematical model was established through theoretical analysis on the laser rotary grooving process of 40Cr bars, and then L25(56) orthogonal tests were conducted to study the influence of factors including the laser parameters such as peak power (Pk), pulse width (τ) and pulse frequency (f), and the processing parameters such as processing speed (n), defocusing amount (s) and repeat turns (N). The influence order and optimum range of these factors were obtained by means of ANOVA analysis, and further shearing experiment was carried out on 40Cr bars. The results indicate that the influence order of the factors is N>s>Pk>f>τ>n, and the F values of N and s are 11.925 and 5.268 respectively, both of which have remarkable effects. The optimum ranges of these influencing factors are: Pk≥9.6 kW, τ≥0.3 ms, 3≤N≤10, 10 r/min≤n≤25 r/min, and s=0 mm. The sum of squares of errors (ε) between theoretical depth and real depth is 0.112 mm2 which proves that the calculation formula of theoretical groove depth h is accurate. Compared with the 40Cr billets processed by traditional shearing, the sheared surface inclination is 0.3°, and the weight tolerance is only 0.35%, resulting in an accuracy improvement of more than 13 times and 8 times, respectively. © 2016, Editorial Office of Journal of Xi'an Jiaotong University. All right reserved.

引用

页码：121 / 128

页数：7

共 15 条

[1]

Ma G., Lang F., Gong J., Research and application of crack technology in stress blanking, Journal of Gansu Sciences, 15, 3, pp. 86-90, (2003)

[2]

Zhao R., Zhao S., Zhong B., Experimental study on novel precision cropping machinery using rotary striking action, Applied Mechanics and Materials, 281, 1, pp. 287-292, (2013)

[3]

Fu J., Li Y., Lei B., Et al., Experiment research on the high-speed precision shearing of metal bar, Journal of Mechanical Engineering, 41, 5, pp. 154-156, (2005)

[4]

Zhong B., Zhao S., Zhao R., Et al., Investigation on the influences of clearance and notch-sensitivity on a new type of metal-bar non-chip fine-cropping system, International Journal of Mechanical Sciences, 76, 6, pp. 144-151, (2013)

[5]

Sahin A.Z., Ayar T., Yilbas B.S., First and second law analyses of laser cutting process in relation to the end product quality, International Journal of Energy Research, 32, 8, pp. 689-697, (2008)

[6]

Meng Q., Wang X., Xu W., Et al., Vaporization-melt ratio mathematical model and experiments of laser cutting sheet metal, Journal of Mechanical Engineering, 47, 17, pp. 172-178, (2011)

[7]

Brugmann M.H., Thomas F., Comparative theoretical analysis of continuous wave laser cutting of metals at 1 and 10 μm wavelength, Applied Physics: A, 116, 3, pp. 1353-1364, (2013)

[8]

Kheloufi K., Amara E.H., Numerical investigation of the effect of some parameters on temperature field and kerf width in laser cutting process, Physics Procedia, 39, 7, pp. 872-880, (2012)

[9]

Bazyleva I.O., Galushkin M.G., Golubev V.S., Et al., Thermal losses in the process of gas-assisted laser cutting of metals, Proceedings of SPIE, 4644, 4, pp. 73-82, (2002)

[10]

Golnabi H., Bahar M., Investigation of optimum condition in oxygen gas-assisted laser cutting, Optics & Laser Technology, 41, 4, pp. 454-460, (2009)

← 1 2 →