Study of hump instability phenomena in pump turbine at large partial flow conditions on pump mode

被引：5

作者：

Yang J. ^{[1
,2
,3
]}

Yuan S. ^{[4
]}

Pavesi G. ^{[5
]}

Li C. ^{[1
,2
]}

Ye Z. ^{[1
,2
]}

机构：

[1] School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai

[2] Key Laboratory of Flow Control and Simulation, University of Shanghai for Science and Technology, Shanghai

[3] Key Laboratory of Fluid and Power Machinery of Ministry of Education, Xihua University, Chengdu

[4] National Research Center of Pumps, Jiangsu University, Zhenjiang

[5] Department of Industrial Engineering, University of Padua, Padua

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2016年 / 52卷 / 24期

关键词：

Hump instability; Large partial flow conditions; Pump mode; Pump turbine; Unsteady flow pattern;

D O I：

10.3901/JME.2016.24.170

中图分类号：

学科分类号：

摘要：

For middle- and high-specific speed pump turbines, the hump instability appearing at large partial flow conditions seriously restricts its stable operation range. These phenomena relate closely to the inner unsteady flow in pump turbine. We investigate the characterization of pressure fluctuation and the mechanism of unsteady flow by an experimental and numerical study of the unsteady flow occurring among the adjustable blades. For pump working at either full or part load conditions, two kinds of periodic pressure pulsations in the diffuser vane have been observed and analyzed. A hump instability appears only when the actual flow rate of head curve is 0.45-0.75 times of the designed value, and our frequency analysis further shows that its appearance is closely related to the two above pressure fluctuations. © 2016 Journal of Mechanical Engineering.

引用

页码：170 / 178

页数：8

共 28 条

[1]

Fu Z., Liu W., Zheng J., Et al., Technical progress of hydraulic development for pump-turbine in DFEM, Mechanical & Electrical Technique of Hydropower Station, 25, 2, pp. 5-9, (2010)

[2]

Ma P., Wang J., Wang J., Et al., Flow characteristics analysis in saddle zone for high specific speed bi-directional pump, Fluid Machinery, 42, 10, pp. 11-15, (2014)

[3]

Mei Z., Pumped Storage Power Generation Technology, (2000)

[4]

Li D., Wang H., Xiang G., Et al., Unsteady simulation and analysis for hump characteristics of a pump turbine model, Renewable Energy, 77, pp. 32-42, (2015)

[5]

Hergt P., Starke J., Flow patterns causing instabilities in the performance curves of centrifugal pumps with vaned diffusers, Proceedings of the Second International Pump Symposium, pp. 67-75, (1985)

[6]

Gulich J.F., Centrifugal Pumps, (2010)

[7]

Iino M., Tanaka K., Miyagawa K., Et al., Numerical simulation of hysteresis on head/discharge characteristics of a centrifugal pump, ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference, pp. 1165-1172, (2003)

[8]

Murakami M., Heya N., Swirling flow in suction pipe of centrifugal pumps: 1st report, distribution of velocity and energy, Bulletin of JSME, 34, 9, pp. 328-337, (1966)

[9]

Brennen C., Acosta A., The dynamic transfer function for a cavitating inducer, Journal of Fluids Engineering, 98, 2, pp. 182-191, (1976)

[10]

Greitzer E.M., The stability of pumping systems-the 1980 Freeman Scholar Lecture, Journal of Fluids Engineering, 103, 2, pp. 193-242, (1981)

← 1 2 3 →