Effect of dry sliding wear behaviour of AA6061/ZrB2/SiC Hybrid Composite

被引：0

作者：

Rajesh Ruban S. ^{[1
]}

Leo Dev Wins K. ^{[1
]}

David Raja Selvam J. ^{[1
]}

Arun Richard A. ^{[1
]}

机构：

[1] Karunya School of Mech. Sciences, Karunya University, Coimbatore

来源：

International Journal of Vehicle Structures and Systems | 2016年 / 8卷 / 02期

关键词：

Metal matrix composite; Normal load; Pin-on-disc; Wear rate; ZrB2 and SiC;

D O I：

10.4273/ijvss.8.2.09

中图分类号：

学科分类号：

摘要：

This paper investigates the dry sliding wear behaviour of AA6061/ZrB2/SiC hybrid composite prepared by the stir casting. A pin-on-disc wear apparatus was used for this study. The effect of ZrB2 and SiC particulate content and normal load on wear rate was analyzed. The insitu fabricated ZrB2 and the reinforced SiC particles enhance the wear resistance of the AA6061 composite. The worn surface analysis of the composite as a function of ZrB2 and SiC particulate content and normal load are also presented. © 2016. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：108 / 111

页数：3

共 22 条

[1]

Heinz A., Haszler A., Keidel C., Moldenhauer S., Benedictus R., Miller W.S., Recent development in aluminium alloys for aerospace applications, Materials Science and Engineering: A, 280, 1, pp. 102-107, (2000)

[2]

Krishnaraj C., Sundaram G., Karthick Kumar C., Kathirvel K., Analysis of machining and surface finishing of various materials in EDM, ARPN J. Engg. and Applied Sciences, 10, 14, pp. 6140-6146, (2015)

[3]

Miracle D.B., Metal matrix composites - From science to technological significance, Composites Science and Technology, 65, 15, pp. 2526-2540, (2005)

[4]

Sannino A.P., Rack H.J., Dry sliding wear of discontinuously reinforced aluminium composites, Wear, 189, 1, pp. 1-19, (1995)

[5]

Ruban S.R., Win L.D., Selvam J.D.R., Kiran S., Fabrication and characterization of insitu formed ZrB2 and SiC particulate reinforced A6061 matrix composites, Int. J. Applied Engineering Research, 10, 85, pp. 537-542, (2015)

[6]

Krishnaraj C., Vignesh R.V., Characterization of hybrid black toner using the parameters waste toner and Nano phase carbon, ARPN J. Engineering and Applied Sciences, 10, 14, pp. 6135-6139, (2015)

[7]

Fogagnolo J.B., Robert M.H., Ruiz-Navas E.M., Torralba J.M., 6061 Al reinforced with zirconium diboride particles processed by conventional powder metallurgy and mechanical alloying, J. Materials Science, 39, 1, pp. 127-132, (2004)

[8]

Rajan T.P.D., Pillai R.M., Pai B.C., Satyanarayana K.G., Rohatgi P.K., Fabrication and characterisation of Al-7Si-0.35 Mg/fly ash metal matrix composites processed by different stir casting routes, Composites Science and Technology, 67, 15, pp. 3369-3377, (2007)

[9]

Tjong S.C., Ma Z.Y., Microstructural and mechanical characteristics of insitu metal matrix composites, Materials Science and Engineering, 29, 3, pp. 49-113, (2000)

[10]

Sonber J.K., Murthy T.S.R.C., Subramanian C., Kumar S., Fotedar R.K., Suri A.K., Investigations on synthesis of ZrB2 and development of new composites with HfB2 and TiSi2, Int. J. Refractory Metals and Hard Materials, 29, 1, pp. 21-30, (2011)

← 1 2 3 →