The 3D printing polymers and their printing technologies

被引：0

作者：

Chen, Shuoping ^{[1
]}

Yi, Heping ^{[1
]}

Luo, Zhihong ^{[1
]}

Zhuge, Xiangqun ^{[1
]}

Luo, Kun ^{[1
]}

机构：

[1] College of Materials Science and Engineering, Guilin University of Technology, Guilin

来源：

Cailiao Daobao/Materials Review | 2016年 / 30卷 / 04期

关键词：

3D printing; Polymer; Printing material; Printing technology;

D O I：

10.11896/j.issn.1005-023X.2016.07.010

中图分类号：

学科分类号：

摘要：

3D printing, also known as additive manufacturing, refers to the technology which can create a 3D solid object with increasing successive layers of materials based on 3D mathematical model and data. Compared with traditional material machining technologies, the 3D printing has many advantages, which has attracted considerable attention in the field of industrial manufacturing, financial investment, academic research, news media and social public at home and abroad. The current constraints of 3D printing technology development are mainly printing material and printing technology. Polymers hold a dominant position in the field of 3D printing. The 3D printing polymers (thermoplastic polymers and photosensitive resins) and corresponding printing technologies (such as FDM, SLS, SLA, Polyjet, and etc.) are introduced, and their advantages and disadvantages are discussed. The problems and challenges of the development for 3D printing polymers and technologies are also discussed. © 2016, Materials Review Magazine. All right reserved.

引用

页码：54 / 59

页数：5

共 49 条

[41]

Liu T., Hu X., Fang J., Et al., Preparation and performance testing of 3D printing photo-curable resin, Eng Plastics Appl, 42, 10, (2014)

[42]

Hang B., Xie W., Yang Z., Et al., Preparation with the photosensitive resin for 3D printing stereolithography technique and study on its properties, J Funct Mater, 45, 24, (2014)

[43]

Jiang Y., Chen L., Meng Q., Et al., Preparation of a photosensitive resin and the application in 3D printing and removal of the formaldehyde, Information Recording Mater, 16, 4, (2015)

[44]

Hull C.W., Apparatus for production of three-dimensional objects by stereolithography, (1986)

[45]

Lee M.P., Cooper G.J.T., Hinkley T., Et al., Development of a 3D printer using scanning projection stereolithography, Scientific Reports, 5, (2015)

[46]

Chang C.C., Rapid prototyping fabricated by UV resin spray nozzles, Rapid Prototyping J, 10, 2, (2004)

[47]

Dimitrov D., Sehreve K., Debeer N., Advances in three dimensional printing-state of the art and future perspectives, Rapid Prototyping J, 12, 3, (2006)

[48]

Lee I.H., Cho H., Finite element analysis for fracture criterion of polyjet materials, J Korean Soc Manufacturing Process Eng, 14, 4, (2015)

[49]

Gaynor A.T., Meisel N.A., Williams C.B., Et al., Multiple-material topology optimization of compliant mechanisms created via polyJet three-dimensional printing, J Manufacturing Sci Eng Transactions of the Asme, 136, 6, (2014)

← 1 2 3 4 5 →