共 46 条
[1]
Sun X., Jiang M., Miao C., Et al., Study on large deformation and failure mechanism of deep buried stratified slate tunnel and control strategy of high constant resistance anchor cable, Eng. Fail. Anal., 144, (2023)
[2]
Lu W., Chen M., Geng X., Et al., A study of excavation sequence and contour blasting method for underground powerhouses of hydropower stations, Tunn. Undergr. Sp. Technol., 29, pp. 31-39, (2012)
[3]
Rahimi B., Sharifzadeh M., Feng X.-T., A comprehensive underground excavation design (CUED) methodology for geotechnical engineering design of deep underground mining and tunneling, Int. J. Rock Mech. Min. Sci., 143, (2021)
[4]
Wang W., Ren J., Ding Z., Liu Q., Failure mechanisms and stability control principles of high geostressed deep mining structures: Investigation by FDEM and field measurements, Eng. Fail. Anal., 169, (2025)
[5]
Yang R.S., Ding C.X., Yang L.Y., Et al., Behavior and law of crack propagation in the dynamic-static superimposed stress field, J. Test. Eval., 46, pp. 2540-2548, (2018)
[6]
Yang R.S., Ding C.X., Yang L.Y., Et al., Crack propagation behavior in slit charge blasting under high static stress conditions, Int. J. Rock Mech. Min. Sci., 119, pp. 117-123, (2019)
[7]
Chen C., Zhu M., Li Q., Xu P., Et al., Design and application of a dynamic photoelasticity-digital image correlation comprehensive experimental system for blast loads, Appl. Opt., 64, pp. 287-295, (2025)
[8]
Yang L., Ding C., Yang R., Lei Z., Et al., Full field strain analysis of blasting under high stress condition based on digital image correlation method, Shock Vib., pp. 1-7, (2018)
[9]
Lu A., Yan P., Lu W., Et al., Crack propagation mechanism of smooth blasting holes for tunnel excavation under high in-situ stress, Eng. Fract. Mech., 304, (2024)
[10]
Ding J., Yang J., Ye Z., Et al., Numerical study on rock blasting assisted by in-situ stress redistribution, Tunn. Undergr. Sp. Technol., 153, (2024)