Wiebe parameters prediction of diesel engine based on neural network

被引：0

作者：

Li W. ^{[1
]}

Liu C. ^{[1
]}

Ma X. ^{[1
]}

Xia W. ^{[1
]}

Zhang Z. ^{[1
]}

机构：

[1] College of Power and Energy Engineering, Harbin Engineering University, Harbin

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2016年 / 47卷 / 10期

关键词：

Diesel engine; Neural network; Numerical simulation; Prediction; Wiebe formula;

D O I：

10.6041/j.issn.1000-1298.2016.10.047

中图分类号：

学科分类号：

摘要：

Wiebe formula as a semi-empirical formula that calculates heat release in the zero-dimensional combustion model of diesel engine was widely used in the simulation of working process of diesel engine, the accuracy of simulation was mainly dependent on choice of parameters in the formula, but there were some blindness and poor universality in the traditional Wiebe parameters selection method. So in view of shortcoming of the selection method, the D4114B type electricity-generating diesel engine was taken as an example, a diesel engine Wiebe formula parameters prediction method was proposed based on neural network. By experimental measurement of cylinder pressure curve, the combustion heat release rate was backward deducted, the heat release rate curve was numerically fitted, and the neural network was trained, a neural network which can be used to predict the parameters of Wiebe formula was established. Through the comparison of predicted results and experimental data, and evaluation of prediction accuracy, the accuracy and feasibility of prediction method were verified. On this basis, D4114B diesel engine dynamic simulation model was set up by using Modelica language, and the transient performance of diesel engine was simulated and researched. Finally, the simulation results of neural network input parameters were compared with experimental value, which proved the Wiebe formula parameters prediction method can be applied to the diesel engine dynamic simulation study. © 2016, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：365 / 371

页数：6

共 17 条

[1]

Yang R., Modeling and simulation of diesel engines based on zero-dimensional model, Internal Combustion Engines, 1, pp. 8-10, (2014)

[2]

Wang H., Wang Y., Xu R., Et al., Transient modeling and simulation of nuclear emergency diesel generators during the loading process, Journal of Harbin Engineering University, 36, 6, pp. 784-788, (2015)

[3]

Sun J., Tu H., Research on the method of determining zero-dimensional model's empirical parameters based on optimization algorithm, Journal of Wuhan University of Technology, 38, 2, pp. 277-279, (2014)

[4]

Shaver G.M., Roelle M.J., Gerdes J.C., Modeling cycle-to-cycle dynamic and model transition in HCCI engines with variable valve actuation, Control Engineering Practice, 14, 3, pp. 213-222, (2006)

[5]

Wang X., Hu J., He X., Et al., Quasi-dimensional combustion model updating method based on genetic algorithm, Journal of Academy of Armored Force Engineering, 27, 1, pp. 27-31, (2013)

[6]

He Y., Qiu Z., Feng L., A new approach to appraising working condition of a diesel engine based on artificial neural networks, Transactions of the Chinese Society for Agricultural Machinery, 33, 5, pp. 1-3, (2002)

[7]

Winterbone D.E., Thiruarooran C.A., Wholly dynamic model of turbocharged diesel engine for transfer function evaluation, (1977)

[8]

Lu F., Huang H., Yang R., Et al., Development of combustion test and analysis system for internal combustion engine, China Measurement & Test, 40, 1, pp. 83-87, (2014)

[9]

Woschni G., A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine, (1967)

[10]

Du W., Zhao Q., Liu F., Mechanical efficiency of diesel engine based on pressure measurements of all cylinders, Transactions of the CSAE, 30, 2, pp. 31-37, (2014)

← 1 2 →