Three-phase EMI filter based on switching power supply

被引：0

作者：

Zhou, Feng-Dao ^{[1
]}

Dong, Wei ^{[1
]}

Bao, Zhi-Qiang ^{[1
]}

Xue, Kai-Chang ^{[1
]}

Hu, Yue ^{[1
]}

Sun, Cai-Tang ^{[1
]}

机构：

[1] College of Instrumentation and Electrical Engineering, Jilin University, Changchun

来源：

Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) | 2015年 / 45卷 / 01期

关键词：

Common-mode inductor; Electrical engineering; Electromagnetic compatibility; Switching power supply; Three-phase EMI filter;

D O I：

10.13229/j.cnki.jdxbgxb201501032

中图分类号：

学科分类号：

摘要：

In order to suppress the injection of three-phase Electromagnetic Interference (EMI) of switching power supply into the power grid, a design method of three-phase EMI filter is proposed. By modeling and analyzing the three-phase common-mode inductance, the ideal equivalent circuits of common-mode and differential-mode filters are built. The effect of high frequency on ideal equivalent circuits is analyzed. The insertion loss expression based on parameter matrix is determined. Parameter matrixes of common-mode and differential-mode filters are derived under ideal and high frequency conditions. According to the characteristics of load impedance in the power grid side and source impedance in the switching power supply side, the relationship between insertion loss and frequency is analyzed. Because that high conductivity of soft magnetic ferrite has gyromagnetic frequency limit and nonlinear hysteresis loop, their inhibitory effect on common-mode inductance and their influence on common-mode insertion loss are analyzed. The filter's parameters are determined based on the related suppress standards and requirements. Experiment results show that using three-phase EMI filter the noise peak of the switching power supply can be suppressed by about 21dB. ©, 2014, Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition). All right reserved.

引用

页码：216 / 221

页数：5

共 13 条

[1]

An J., Wu J.-F., Wu Y.-H., Electromagnetic compatibility design of electronic control system for attitude control flywheel, Journal of Jilin University (Engineering and Technology Edition), 41, 4, pp. 998-1003, (2011)

[2]

Wu M.K.W., Tse C.K., A review of EMI problems in switch mode power supply design, Journal of Electrical and Electronics Engineering Australia, 16, 3, pp. 193-204, (1996)

[3]

Zhang H.-K., Zhao Y.-L., A novel passive lossless high power factor rectifier based on one cycle control, Journal of Central South University (Science and Technology), 41, 6, pp. 2246-2251, (2010)

[4]

Wang L., Design and study of EMI source filter, (2007)

[5]

Shih F.-Y., Chen Dan Y., Wu Y.-P., Et al., A procedure for designing EMI filters for AC line applications, IEEE Transactions on Power Electronics, 11, 1, pp. 170-181, (1996)

[6]

Ye S., Eberle W., Liu Y.-F., A novel EMI filter design method for switching power supplies, IEEE Transactions on Power Electronics, 19, 6, pp. 1668-1678, (2004)

[7]

Guo T., Chen Dan Y., Lee Fred C., Separation of the common-mode and differential-mode conducted EMI noise, IEEE Transactions on Power Electronics, 11, 3, pp. 480-488, (1996)

[8]

Qiu Y., Xiao L., Cao H.-G., EMI filter design based on noise simulation, Electric Power Automation Equipment, 30, 9, pp. 96-100, (2010)

[9]

Mark J., On modeling the common mode inductor, IEEE International Symposium on Electromagnetic Compatibility, pp. 452-457, (1991)

[10]

Weber S., Schinkel M., Guttowski S., Et al., Calculating parasitic capacitance of three-phase common-mode chokes, Power Conversion Intelligent Motion, pp. 1-6, (2005)

← 1 2 →