Removal of arsenite from aqueous environment by zero-valent iron (ZVI)

被引：0

作者：

Zhao, Yaguang ^{[1
,2
]}

Wan, Junfeng ^{[1
]}

Wang, Jie ^{[1
]}

Yu, Fei ^{[1
]}

Wang, Yan ^{[1
]}

机构：

[1] School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou, 450001, Henan

[2] Henan Textile & Architecture Design Co. Ltd., Zhengzhou, 450007, Henan

来源：

Huagong Xuebao/CIESC Journal | 2015年 / 66卷 / 02期

基金：

中国国家自然科学基金;

关键词：

Adsorption; Arsenic polluted wastewater; Arsenic removal; Environment; Oxidation; ZVI;

D O I：

10.11949/j.issn.0438-1157.20141073

中图分类号：

学科分类号：

摘要：

The batch and column experiments on removal of As(III) from aqueous environment by zero-valent iron (ZVI) and quartz sand mixed with ZVI were studied. The batch test results showed that removal efficiency of As(III) by ZVI was dependent on pH value and the optimum range of pH was 4-9. As(III) was mainly removed though adsorption and co-precipitation by the surface of ZVI and its corrosion products. Meanwhile, simultaneous oxidation and reduction of As(III) on the surface of ZVI occurred during the corrosion process of ZVI. As(III) was oxidized in oxidation of Fe2+ to Fe3+. Quartz sand mixed with ZVI was used for the adsorption of As(III) from simulated arsenic-containing wastewater in the column experiment. After 20 d of continuous adsorption of As(III), the column was saturated. The calculated adsorption capacity of As(III) by ZVI was 89.90 mg·g-1 and the adsorption capacity of As(III) was affected by the crystalline types of ZVI corrosion products on the surface of quartz sand. In this study, amorphous corrosion products of ZVI had the largest adsorption capacity, and mass fraction and atom fraction reached 6.73 and 2.15 respectively. © All Rights Reserved.

引用

页码：730 / 737

页数：7

共 27 条

[1]

Cullen W.R., Reimer K.J., Arsenic speciation in the environment, Chemical Reviews, 89, pp. 713-764, (1989)

[2]

Ferguson J.F., Gavis J., A review of the arsenic cycle in natural waters, Water Res., 6, pp. 1259-1274, (1972)

[3]

NRC Subcommittee to Update the 1999 Arsenic in Drinking Water, (2002)

[4]

WHO, Arsenic Compounds, Environmental Health Criteria, (2001)

[5]

Mondal P., Majumder C.B., Mohanty B., Laboratory based approaches for arsenic remediation from contaminated water: Recent developments, J. Hazard. Mater., 137, 1, pp. 464-479, (2006)

[6]

Chatterjee A., Das D., Mandal B.K., Chowdhury T.R., Samanta G., Chakraborty D., Arsenic in ground water in six districts of West Bengal, India: the biggest arsenic calamity in the world(I): Arsenic species in drinking water and urine of the affected people, Analyst, 120, pp. 643-656, (1995)

[7]

Dhar R.K., Biswas B.K., Samanta G., Mandal B.K., Chakraborti D., Roy S., Groundwater arsenic calamity in Bangladesh, Curr. Sci., 73, 1, pp. 48-59, (1997)

[8]

Liu Z., Han H., Wu W., Removal effect of arsenic pollutant by coagulation sedimentation method, Water Technology, 5, 5, pp. 8-11, (2011)

[9]

Huang Y., Liu D., Qu W., Liu J., Comparison of efficiency of sorption materials for As(III) removal from water, Environmental Science & Technology, 33, 6, pp. 89-92, (2010)

[10]

Wang M., Li T., Zhu C., Zhao L., Jiang J., Yang S., Application of MIEX-DOC<sup>®</sup> ion exchange resin in arsenic removal of drinking water, Chemistry & Bioengineering, 29, 3, pp. 71-74, (2012)

← 1 2 3 →