Compounding control of ultra-precision positioning stage based on inverse generalized pi model

被引：3

作者：

Tian, Yanbing ^{[1
,2
]}

Wang, Tao ^{[1
]}

Wang, Meiling ^{[1
]}

机构：

[1] School of Automation, Beijing Institute of Technology, Beijing

[2] Automation Engineering College, Qingdao Technological University, Qingdao

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 02期

关键词：

Bellows; Compounding control; Generalized hysteresis; Ultra-precision;

D O I：

10.3901/JME.2015.02.198

中图分类号：

学科分类号：

摘要：

In order to improve the accuracy and stroke of the ultra-precision positioning stage, a new type of pneumatic servo positioning stage with single driving device is designed. Metal bellows are used as driving device in the positioning stage, the stage is supported by air flotation sliders to realize large stoke and ultra-precision positioning. In order to reduce the number of operators and to improve modeling accuracy, hysteresis operators are modified to build the generalized PI model, and the model is validated too. A solution of the inverse generalized PI model is given. The compounding controller is designed based on inverse generalized PI model. Experiments are implemented on the step signal, sawtooth signal and multifrequency signal. The results show that the positioning accuracy of the step response is less than 30 nm, the average tracking errors on sawtooth and multifrequency input are 0.96 μm and 0.63 μm based on the PI model, and the average tracing errors are 0.49 μm, and 0.45 μm based on generalized PI model. Experiments show that the generalized PI model is effective for increasing the positioning accuracy of the stage. © 2015 Journal of Mechanical Engineering.

引用

页码：198 / 206

页数：8

共 26 条

[1]

Zhang C., Liu Q., Design and control of air bearing precision positioning stage driven by linear motors, Journal of Beijing University of Aeronautics and Astronautics, 34, 2, pp. 224-228, (2008)

[2]

Zhao X., Zhang S., Zhang D., Design and simulation of the control system of precision positioning table driven by voice coil actuator, Journal of Tianjin University, 40, 2, pp. 127-131, (2007)

[3]

Feng X., Zhang D., Zhao X., The new high-speed precision positioning system design methodology based on voice coil motor, China Mechanical Engineering, 16, 16, pp. 1414-1418, (2005)

[4]

Shinno H., Yoshika H., Taniguchi K., A newly developed linear motor-driven aerostatic X-Y planar motion table system for nano-machining, Annals of the CIRP, 56, pp. 369-372, (2007)

[5]

Chiang M., Chen C., Tsou T., Large stroke and high precision pneumatic-piezoelectric hybrid positioning control using adaptive discrete variable structure control, Mechatronics, 15, pp. 523-545, (2005)

[6]

Kenji K., Takeshi A., Kotaro T., Et al., Development of coarse/fine dual stage using pneumatically driven bellows actuator and cylinder with air bearings, Precision Engineering, 34, pp. 526-533, (2010)

[7]

Janaideh M.A., Rakheja S., Su C.Y., A generalized Prandtl-Ishlinskii model for characterizing hysteresis nonlinearities of smart actuators, Smart Mater. Struct., 18, 4, pp. 1-9, (2009)

[8]

Krejci P., Kuhnen K., Inverse control of systems with hysteresis and creep, Proc. Inst. Elect. Eng.: Control Theory Applications, 148, 3, pp. 185-192, (2001)

[9]

Kuhnen K., Modeling, identification and compensation of complex hysteretic nonlinearities: A modified Prandtl-Ishlinskii approach, European Journal of Control, 9, 4, pp. 407-418, (2003)

[10]

Janaideh M.A., Su C.Y., Rakheja S., Development of the ratedependent Prandtl-Ishlinskii model for smart actuators, Smart Mater. Struct., 17, 3, pp. 1-11, (2008)

← 1 2 3 →