New development on technology and equipment of sheet hydroforming

被引：11

作者：

Yuan, Shijian ^{[1
,2
]}

Liu, Wei ^{[1
,2
]}

Xu, Yongchao ^{[1
,2
]}

机构：

[1] School of Materials Science and Engineering, Harbin Institute of Technology, Harbin

[2] National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 08期

关键词：

Auto-body panels; Curved-surface part; Deep drawing ratio; Forming precision; Hydromechanical deep drawing; Sheet hydroforming; Wrinkling;

D O I：

10.3901/JME.2015.08.020

中图分类号：

学科分类号：

摘要：

With the development of sheet metal parts on large size, thin-wall, deep cavity, complicated curved-surface and hard forming materials, the manufacturing industries, such as aviation, aerospace and automobile industry, have paid more attentions to the low-cost and high flexible sheet hydroforming technology, which is up against new opportunities and challenges. The state-of-the-art of sheet hydroforming technology is introduced, and the new developing technologies, including hydromechanical deep drawing with independent radial hydraulic pressure, pre-bulging hydromechanical deep drawing, hydromechanical deep drawing with double-side hydraulic pressures, double sheets hydroforming and warn sheet hydroforming, are presented in detail. The current application statements of domestic and foreign on the domains of automobile, aerospace and others are summarized, the progress of R&D on sheet hydroforming equipments are reviewed, and the words' largest sheet hydroforming equipment with tonnage of 150 MN and liquid volume of 5 m3 is introduced, the development tendency of sheet hydroforming technology is prospected. ©2015 Journal of Mechanical Engineering

引用

页码：20 / 28

页数：8

共 36 条

[1]

Lee M.G., Kim C., Pavlina E.J., Et al., Advances in sheet forming: Materials modeling, numerical simulation, and press technologies, Journal of Manufacturing Science and Engineering, 133, (2011)

[2]

Ngaile G., Kinsey B., Advances in plastic forming of metals, Journal of Manufacturing Science and Engineering, 133, (2011)

[3]

Ingarao G., Lorenzo R.D., Micari F., Sustainability issues in sheet metal forming processes: An overview, Journal of Cleaner Production, 19, pp. 337-347, (2011)

[4]

Tolazzi M., Hydroforming applications in automotive: A review, International Journal of Materials Forming, 3, pp. 307-310, (2010)

[5]

Liu X., Wang G., Li S., Et al., Forecasts on crucial manufacturing technology development of heavy lift launch vehicle, Aeronautical Manufacturing Technology, 2, pp. 1-6, (2013)

[6]

Yang D.Y., Innovation and creativity in metal forming, The 10th International Conference on Technology of Plasticity, pp. 25-30, (2011)

[7]

Jeswiet J., Geiger M., Kleiner M., Et al., Metal forming progress since 2000, CIRP Journal of Manufacturing Science and Technology, 1, pp. 2-17, (2008)

[8]

Yuan S., Modern Hydroforming Technology, (2009)

[9]

Yang D.Y., Kim J.B., Lee D.W., Investigation into manufacturing of very long cups by hydromechanical deep drawing and ironing with controlled radial pressure, Annals of the CIRP, 44, pp. 255-258, (1995)

[10]

Xu Y.C., Han C., Liu X., Et al., Effects of radial pressure on 5A06 aluminum alloy cup hydroforming, Steel Research International, 81, 9, pp. 632-635, (2010)

← 1 2 3 4 →