DYNAMIC CORROSION BEHAVIORS OF AUTENNITIC STAINLESS STEEL IN QUATERNARY NITRATE-NIOTRITE MOLTEN SALT

被引：0

作者：

Ma L. ^{[1
]}

Wu Y. ^{[1
]}

Zhang C. ^{[1
]}

Lu Y. ^{[1
]}

Dong Y. ^{[2
]}

Jiao X. ^{[2
]}

机构：

[1] MOE Key Laboratory of Enhanced Heat Transfer and Energy Conservation, Beijing Key Laboratory of Heat Transfer and Energy Conversion, Beijing University of Technology, Beijing

[2] Hebei Jingkuang New Energy Technology Co.，Ltd, Shijiazhuang

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2023年 / 44卷 / 03期

关键词：

concentrating solar power; corrosion; dynamic; molten salt; stainless steel;

D O I：

10.19912/j.0254-0096.tynxb.2021-1286

中图分类号：

学科分类号：

摘要：

To explore the compatibility between the new mixture of low melting point fused quaternary nitrate-nitrite prepared in our laboratory and stainless steels in concentrating solar power system，the dynamic corrosion experiment of 304 stainless steel during 1000 h is carried out at 565 ℃ and the flow rate of 0.6，1.3 and 2.0 m/s，respectively. The experimental results show that the oxidation corrosion of 304 stainless steel occurs at three flow rates. Corrosion weight loss(mmass) increases with the increasing corrosion time，and the change law is closer to the parabolic relationship. Meanwhile，the varied flow rates had obvious effects on corrosion behaviors. In addition，the increase in flow rate had no significant effects on the types of oxidation products. © 2023 Science Press. All rights reserved.

引用

页码：497 / 503

页数：6

共 39 条

[1]

CHEN C, WANG S T，, Et al., Experimental investigation on enhanced heat transfer in transversally corrugated tube with molten salt［J］, Experimental thermal and fluid science, 47, pp. 108-116, (2013)

[2]

SUN H, ZHANG P, WANG J Q., Corrosion problems related with molten nitrate salts for heat transfer and thermal storage［J］, Corrosion science and protection technology, 29, 5, pp. 567-574, (2017)

[3]

GIL A, MEDRANO M，, MARTOREll I, Et al., State of the art on high temperature thermal energy storage for power generation. Part 1- concepts，materials and modellization ［J］, Renewable and sustainable energy reviews, 14, 1, pp. 31-55, (2010)

[4]

PENG Q，, WEI X L，, DING J，, Et al., High- temperature thermal stability of molten salt materials［J］, International journal of energy research, 32, 12, pp. 1164-1174, (2008)

[5]

SANG L X, CAI M，, REN N，, Et al., Improving the thermal properties of ternary carbonates for concentrating solar power through simple chemical modifications by adding sodium hydroxide and nitrate［J］, Solar energy materials and solar cells, 124, pp. 61-66, (2014)

[6]

GLATZMAER G., Summary report for concentrating solar power thermal storage workshop［R］, (2011)

[7]

REN N, MA C F，, Et al., Preparation and thermal properties of quaternary mixed nitrate with low melting point［J］, Solar energy materials and solar cells, 127, pp. 6-13, (2014)

[8]

DU W B，, Et al., Natural convection heat transfer of molten salt in single energy storage tank［J］, Science China- technological sciences, 59, 8, pp. 1244-1251, (2016)

[9]

WU Y T, LIU S W，, XIONG Y X，, Et al., Experimental study on the heat transfer characteristics of a low melting point salt in a parabolic trough solar collector system［J］, Applied thermal engineering, 89, pp. 748-754, (2015)

[10]

DUNN R I, HEARPS P J, Wright M N., Molten-salt power towers：newly commercial concentrating solar storage［J］, Proceedings of the IEEE, 100, 2, pp. 504-515, (2012)

← 1 2 3 4 →