Kinematic analysis and experiment of tripod parallel robot

被引：0

作者：

Yang J. ^{[1
]}

Wan B. ^{[1
]}

Gao J. ^{[1
]}

Liu K. ^{[1
]}

Hu M. ^{[1
]}

Zhao Y. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Chongqing University, Chongqing

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2016年 / 47卷 / 10期

关键词：

3-DOF; Kinematic analysis; Parallel robot; Workspace;

D O I：

10.6041/j.issn.1000-1298.2016.10.051

中图分类号：

学科分类号：

摘要：

Because of parallel mechanism has high rigidity, high speed, high carrying capacity, and not cumulative error, etc., it has been widely used in many fields. Especially less degrees of freedom parallel mechanism has become a hot research topic. The inverse and forward position model of Tripod parallel robot was established, through kinematic analysis of the Tripod parallel robot, the degree of freedom was derived. The inverse kinematics and forward kinematics were solved by using algebraic vector method and numerical method. The condition number of Jacobian matrix was derived and the workspace was analyzed. The calculation result showed that the mechanism owned perfect isotropic properties and specious workspace. ADAMS and Matlab kinematics simulation software were used to verify the inverse and forward position model of this mechanism. The simulation results proved the correctness of the model. A model machine of Tripod parallel robot was developed and a series of experiments, such as accurate positioning, line/circle interpolation, continuous interpolation, were carried out. The results suggested that the mathematical model established for this parallel mechanism was correct. The research systemically solved the problem of theoretical analysis of Tripod parallel robot, set up the experimental prototype, and provided strong guidance for the engineering application. © 2016, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：390 / 397

页数：7

共 20 条

[1]

Shi Y., Lu Y., Analysis about workplace of 3-SPR parallel manipulator influenced by the joints' distribution, Journal of Yanshan University, 32, 4, pp. 304-310, (2008)

[2]

Stewart D., A platform with six degrees of freedom, Proceedings of the Institute of Mechanical Engineers, 180, 1, pp. 371-386, (1965)

[3]

Clavel R., Device for the movement and positioning of an element in space

[4]

Zhang L., Mei J., Zhao X., Et al., Dynamic dimensional synthesis of Delta robot, Journal of Mechanical Engineering, 46, 3, pp. 1-7, (2010)

[5]

Zhang Q., Zhang X., Active residual vibration control of planar 3-RRR flexible parallel robots, Transactions of the Chinese Society for Agricultural Machinery, 44, 2, (2013)

[6]

Niu X., Gao G., Liu X., Et al., Dynamics modeling and experiments of 3-DOF parallel mechanism with actuation redundancy, Transactions of the CSAE, 29, 16, pp. 31-41, (2013)

[7]

Lu Y., Xu J., Using CAD geometric variation approach for lettering complicated letter on 3D free-form surface by a 3-DOF parallel machine tool, Proceedings of 2007 10th IEEE International Conference on Computer Aided Design and Computer Graphics, pp. 246-251, (2007)

[8]

Xie F., Liu X., Wang L., Et al., Optimum kinematic design of the 4R 2-DOF parallel mechanism, Tsinghua Science and Technology, 14, 5, pp. 663-668, (2009)

[9]

Zhang Y., Zhang S., Wu X., Kinematic analysis and simulation of 3-CRPa translational parallel mechanism, Transactions of the Chinese Society for Agricultural Machinery, 43, 7, pp. 200-205, (2012)

[10]

Vladimir L., Inverse kinematics, forward kinematic and working space determination of 3-DOF parallel manipulator with S-P-R joint structure, Periodica Polytechnica: Mechanical Engineering, 49, 1, pp. 39-61, (2005)

← 1 2 →