Design and experiment on soybean breeding thresher of double feeding roller and combined threshing cylinder

被引：0

作者：

Gao, Lianxing ^{[1
]}

Zheng, Shiyan ^{[1
]}

Chen, Ruixiang ^{[1
]}

Yang, Dexu ^{[1
]}

机构：

[1] College of Engineering, Shenyang Agricultural University, Shenyang

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2015年 / 46卷 / 01期

关键词：

Axial cylinder; Double feeding roller; Soybean; Thresher;

D O I：

10.6041/j.issn.1000-1298.2015.01.017

中图分类号：

学科分类号：

摘要：

Mechanical threshing plays an important role in the modern soybean production, which is one of key factors causing damage of soybean seeds at the same time. It can not only bring the waste of soybean seeds and economic loss, but also affect seeds germination percentages and soybean yields tremendously, especially for mechanized precision sowing technique. Facing on the problems of higher soybean damage rate and lower soybean threshing rate, the overall design and comprehensive threshing principle of double feeding rollers and combined threshing cylinder soybean breeding thresher was proposed, critical components of combined threshing cylinder, feeding device and transmission system, etc. were designed, and the prototype was developed. Combined threshing cylinder was composed of spiral arrangement of spike tooth, bow tooth, tooth and concave plate screen. The feeding device was mainly composed of double feeding roller. Pneumatic cleaning device as mainly composed of vibrating screen and fan. The main soybean varieties from Agricultural College of Shenyang Agricultural University were selected as test materials, through orthogonal experiment analysis, the three parameters: feeding gear, drum rotating speed and concave plate clearance were selected as experimental factors. Soybean threshing rate and soybean damage rate were selected as experimental indexes. The structure and working parameter of threshing performance was optimized. Experimental results indicated that feeding gear, drum rotating speed and concave plate clearance all had significant impact on soybean threshing rate and soybean damage rate. The most optimum combination region of the moisture content was 16%~18%, the feeding gear was mid-gear (222 r/min), drum rotating speed was 500 r/min, the concave plate clearance was 40 mm, the soybean threshed rate was 98.4% and the soybean damaged rate was 1.4%. ©, 2014, Chinese Society of Agricultural Machinery. All right reserved.

引用

页码：112 / 118

页数：6

共 14 条

[1]

Gao L., Li X., Jie X., Et al., Study on characteristics and ratio of kernel mechanical damage, Journal of Shenyang Agricultural University, 41, 1, pp. 55-58, (2010)

[2]

Hou S., Chen H., Parameters optimization of vertical axial flow thresher for soybean breeding, Transactions of the CSAE, 28, 5, pp. 19-25, (2012)

[3]

Gao L., Zhao X., Yang D., Et al., Development and performance test on pneumatic cleaning-circulatory device of soybean thresher, Transactions of the CSAE, 28, 24, pp. 22-27, (2012)

[4]

Gao L., Du X., Zhang W., Et al., Double-roller peanut sheller with pneumatic circulating, Transactions of the Chinese Society for Agricultural Machinery, 42, 10, pp. 68-73, (2011)

[5]

Zhao X., Study on soybean thresher combined separating cleaning system, (2012)

[6]

Li X., Ma F., Gao L., Design on seed corn thresher with different speeds threshing parts, Transactions of the Chinese Society for Agricultural Machinery, 39, 8, pp. 192-195, (2008)

[7]

Li X., Gao L., Performance test on corn thresher with different-speed threshing parts, Transactions of the CSAE, 25, 12, pp. 102-106, (2009)

[8]

Wang X., Li Y., Xu L., Relationship between thresher velocities and rice grain broken rate, Transactions of the CSAE, 23, 8, pp. 16-19, (2007)

[9]

Li Y., Xu L., Yang X., Et al., Comparative experiment on axial threshing cylinder of rape, Transactions of the Chinese Society for Agricultural Mechinery, 38, 8, pp. 86-89, (2007)

[10]

Xu L., Li Y., Ma C., Et al., Design and experiment of threshing and separating unit with double axial cylinder, Transactions of the Chinese Society for Agricultural Machinery, 40, 11, pp. 55-58, (2009)

← 1 2 →