Hydraulic jump over sloping rough floors

被引：0

作者：

Kumar M. ^{[1
]}

Lodhi A.S. ^{[2
]}

机构：

[1] Department of Civil Engineering, PEC University of Technology, Chandigarh

[2] Department of Civil Engineering, Indian Institute of Technology, Roorkee

来源：

ISH Journal of Hydraulic Engineering | 2016年 / 22卷 / 02期

关键词：

bed roughness height; hydraulic jump; sequent depth ratio; sloping channel;

D O I：

10.1080/09715010.2015.1088409

中图分类号：

TK [能源与动力工程];

学科分类号：

0807 ;

摘要：

This study presents the result of a series of experiments conducted to study the impact of channel slopes, along with channel bed roughness, on characteristics of a hydraulic jump. For this study, three slopes of a flume, viz. 0.000463, 0.00986 and 0.01552, and five bed roughness heights, i.e. 0.002, 0.00398, 0.0056, 0.007 and 0.011 m have been used. The analysis of the data revealed that there was no significant impact of bed roughness heights on characteristics of a hydraulic jump in sloping channels. However, the channel slope significantly affected its characteristics. The existing relationship to estimate the sequent depth ratio in sloping channels was considered for its applicability and it was found unsatisfactory. Therefore, a new relationship is proposed for the same. The comparison between the observed values for the sequent depth ratio, length of a roller and relative energy loss showed an agreement with the calculated values obtained from the proposed relationships. © 2015 Indian Society for Hydraulics.

引用

页码：127 / 134

页数：7

共 17 条

[1]

Ali H.S.M., Effect of roughened-bed stilling basin on length of rectangular hydraulic jumps, J. Hydraul. Eng., ASCE, 117, pp. 83-92, (1991)

[2]

Beirami M.K., Chamani M.R., Hydraulic jump in a sloping channels: sequent depth ratio, J. Hydraul. Eng., ASCE, 132, pp. 1062-1067, (2006)

[3]

Beirami M.K., Chamani M.R., Hydraulic jump in sloping channels: roller length and energy loss, Can. J. Civ. Eng, 37, pp. 535-543, (2010)

[4]

Carollo F.G., Ferro V., Contributo allo studio della lunghezza del rislto su fondo liscio e scabro [Contribution to the study of the length of the projecting free of rough and smooth surfaces], Rivista di Ingegneria Agraria, 35, 4, pp. 13-20, (2004)

[5]

Carollo F.G., Ferro V., Determinazione delle altezze conjugate del rislto libero su fondo liscio e scabro [Determination of heights conjugated prominence free on a smooth and rough], Rivista di Ingegneria Agraria [J. Agril. Eng.], 35, 4, pp. 1-11, (2004)

[6]

Chow V.T., Open channels hydraulics, pp. 425-429, (1959)

[7]

Ead S.A., Rajaratnam N., Plane turbulent wall jets in shallow tailwater, J. Eng. Mech., 128, 2, pp. 143-155, (2002)

[8]

Elevatorski E.A., Hydraulic energy dissipater, (1959)

[9]

Hughes W.C., Flack J.E., Hydraulic jump properties over a rough bed, J. Hydraul. Eng., ASCE, 110, 12, pp. 1755-1771, (1984)

[10]

Kindsvater C.E., The hydraulic jump in sloping channels, Trans. Am. Soc. Civ. Eng., 109, pp. 1107-1120, (1944)

← 1 2 →