Fault Diagnosis and System Reconfiguration Based on Switching Sequence Technology for ANPC Three-Level Cascaded Inverter

被引：0

作者：

Han, Pengcheng ^{[1
]}

Wu, Chao ^{[1
]}

Lou, Ying ^{[1
]}

Li, Fei ^{[1
]}

机构：

[1] Luoyang Institute of Science and Technology, Luoyang

来源：

IET Electric Power Applications | 2025年 / 19卷 / 01期

关键词：

DC–AC power convertors; fault diagnosis; reliability;

D O I：

10.1049/elp2.70039

中图分类号：

学科分类号：

摘要：

This paper proposed a fault diagnosis and system reconfiguration based on switching sequence technology for active neutral point clamped (ANPC) three-level cascaded inverter. In this paper, the flow path of current and the clamp voltage under the single-switch and double-switch open-circuit faults for the power switches are analysed in the ANPC bridge arm. The combination of the clamp voltages corresponding to the four switch modes in each fault mode is determined uniquely. According to the uniqueness of the combination of clamp voltages with the four switch modes, a fault diagnosis method based on the switching sequence technology is proposed which can realise fault diagnosis with 10 fault types in one bridge arm. The faulty bridge arm is bypassed by the clamp power switches to achieve the goal of topology reconfiguration, and carrier phase shift strategy for the remaining module is adopted to achieve the goal of modulating reconfiguration. Finally, the correctness of theoretical analysis is verified by the simulation and experiments. © 2025 The Author(s). IET Electric Power Applications published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology.

引用

共 18 条

[1]

He X., Shu Z., Peng X., Et al., Advanced Cophase Traction Power Supply System Based on Three-Phase to Single-Phase Converter, IEEE Transactions on Power Electronics, 29, 10, pp. 5325-5333, (2014)

[2]

Han P., He X., Ren H., Et al., Fault Diagnosis and System Reconfiguration Strategy of a Single-Phase Three-Level Neutral-Point-Clamped Cascaded Inverter, IEEE Transactions on Industry Applications, 55, 4, pp. 3863-3876, (2019)

[3]

Zeng L., He X., Han P., Et al., Input and Output Harmonic Suppression Strategy of Single-Phase AC–DC–AC Converter, IEEE Transactions on Industrial Electronics, 71, 10, pp. 13042-13052, (2024)

[4]

Li J., Huang A., Liang Z., Bhattacharya S., Analysis and Design of Active NPC (ANPC) Inverters for Fault-Tolerant Operation of High-Power Electrical Drives, IEEE Transactions on Power Electronics, 27, 2, pp. 519-533, (2012)

[5]

Dianguo X., Xiaofeng L., Yong Y., A Survey on Fault Diagnosis and Tolerant Control of Inverters, Transactions of China Electrotechnical Society, pp. 1-12, (2015)

[6]

Shuai X., Jianzhong Z., Overview of Fault-Tolerant Techniques for Multilevel Voltage Source Inverters, Transactions of China Electrotechnical Society, pp. 39-50, (2015)

[7]

Han P., Lou Y., Wu C., Li Z., Wang H., An Adaptive Gain Phase-Locked Loop for Position Sensor-Less Control of Permanent Magnet Synchronous Motor Drives, IET Electric Power Applications, 18, 10, pp. 1254-1265, (2024)

[8]

Shu C., Wei L., Tefang C., Rongjun D., Guixin Z., Research on Open-Circuit Fault Diagnosis and Fault-Tolerant Control Scheme for Rectifier Main Circuits, Transactions of China Electrotechnical Society, pp. 26-35, (2016)

[9]

Chen M., He Y., Open-Circuit Fault Diagnosis in NPC Rectifiers Using Reference Voltage Deviation and Incorporating Fault-Tolerant Control, IEEE Transactions on Power Electronics, 39, 1, pp. 1514-1526, (2024)

[10]

Chen M., He Y., Open-Circuit Fault Diagnosis Method in NPC Rectifiers Using Fault-Assumed Strategy, IEEE Transactions on Power Electronics, 37, 11, pp. 13668-13683, (2022)

← 1 2 →