Research on optimization of column structure design for dynamic performance of machine tool

被引：13

作者：

Liu C. ^{[1
,2
]}

Tan F. ^{[3
]}

Wang L. ^{[1
,2
]}

Cai Z. ^{[1
,2
]}

机构：

[1] Department of Mechanical Engineering, Tsinghua University, Beijing

[2] Beijing Key Lab. of Precision/Ultra-precision Manufacturing Equipments and Control, Tsinghua University, Beijing

[3] School of Mechatronics Engineering, University of Electronic and Technology of China, Chengdu

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2016年 / 52卷 / 03期

关键词：

Column; Dynamic performance; Machine tool; Size optimization; Structure optimization; Topology optimization;

D O I：

10.3901/JME.2016.03.161

中图分类号：

学科分类号：

摘要：

Aiming at the optimization design of machine tool column structure which is weakest link, a method is presented based on topology optimization, ribs form selecting and layout, and size optimization. From kinetic analysis of the machine tool by finite element analysis (FEA), modal analysis and harmonic response analysis illustrate that the column structure is the key part to affect the dynamic performance of the machine tool. Taking the column as optimization object, its basic structure is designed by material distribution of topology optimization. Selecting the W ribs which have well bending stiffness and torsional stiffness to layout and optimize its sizes, the column structure is finally optimized. Analysis results demonstrate that the method effectively improve dynamic performance of the machine tool. On the premise of the column mass does not increase, 6 nature frequencies of the machine tool are increased with different degrees. The first nature frequency is increased by about 10%. The biggest resonance peaks of the machine tool in x direction are reduced by 49.8%, y direction 70.1%, z direction 66.2%. © 2016 Journal of Mechanical Engineering.

引用

页码：161 / 168

页数：7

共 11 条

[1]

Xin Z., Xu Y., Man J., Et al., FEM-based static & dynamic design of numerical control gear machining tool column, Journal of North University of China, 27, 6, pp. 484-486, (2006)

[2]

Yang Y., Zhang W., Li P., Structure optimization design for NC machine bed based on dynamic sensitivity analysis, Journal of Machine Design, 28, 9, pp. 49-52, (2011)

[3]

Zhang T., Structural optimization design for forging machine bed based on finite element method, Forging & Stamping Technology, 35, 6, pp. 74-78, (2010)

[4]

Zhang X., Static and dynamic property analysis and optimization design for mechanical structure based on generalized modular design, (2001)

[5]

Guo L., Zhang H., Ye P., Light weight design of a machine tool based on sensitivity analysis, Journal Tsinghua University, 51, 6, pp. 846-850, (2011)

[6]

Jiang H., Guan Y., Qiu Z., Et al., Dynamic and static multi-objective optimization of a vertical machining center based on response surface method, Journal of Mechanical Engineering, 47, 11, pp. 125-133, (2011)

[7]

Rao L., Hou L., Pan Y., Improvement of the rib plate in machine tools column based on topology optimization, Machine Design and Research, 26, 1, pp. 87-91, (2010)

[8]

Kong J., The dynamic characteristics analysis and optimization of rail weld grinding machine lathe bed, Journal of Hunan University of Arts and Science, 26, 1, pp. 46-49, (2014)

[9]

Huang D., Lee J.J., On obtaining machine tool stiffness by CAE techniques, International Journal of Machine Tools and Manufacture, 41, 8, pp. 1149-1163, (2001)

[10]

Yu C., Zhang H., Wang R., Et al., Study on method for weak link identification of dynamic stiffness of a machine tool and optimization design, Journal of Machine Engineering, 49, 21, pp. 11-17, (2013)

← 1 2 →