Progress in nitrocarburizing of steels with the addition of rare earth elements

被引:0
作者
Zhang L. [1 ,2 ]
Zhang J. [1 ,2 ]
Ren Q. [3 ]
Fu H. [1 ,2 ]
机构
[1] Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing
[2] Beijing Key Laboratory for Corrosion, Erosion and Surface Technology, Beijing
[3] Manufacturing Technology Department, Chongqing Jianshe Industry(Group) Co. Ltd, Chongqing
来源
Cailiao Daobao/Materials Review | 2016年 / 30卷 / 10期
关键词
Nitrocarburizing; Rare earth; Steel;
D O I
10.11896/j.issn.1005-023X.2016.19.003
中图分类号
学科分类号
摘要
Rare earth elements are benefit for improving the hardness and wear resistance properties of nitrocarburizing layers. The effect of rare earth on nitrocarburizing process and corresponding mechanism of steel should be further studied. The paper gives a review of the main research activities recently carried out in the development and types of nitrocarburizing of steels with addition of rare earth elements. The focus is the addition methods and the mechanism of rare earth in five processes of nitrocarburizing. After a brief summarizes of the effect of rare earth on the properties of nitrocarburizing layers and substrate, the paper discusses the challenges and puts forward some suggestions of nitrocarburizing with rare earth. © 2016, Materials Review Magazine. All right reserved.
引用
收藏
页码:19 / 25
页数:6
相关论文
共 41 条
[21]  
Yan M.F., Liu R.L., Influence of process time on microstructure and properties of 17-4PH steel plasma nitrocarburized with rare earths addition at low temperature, Appl Surf Sci, 256, 20, (2010)
[22]  
Shangguan Q.Q., Cheng X.H., Effect of rare earth elements on erosion resistance of nitrocarburized layers of 38CrMoAl steel, J Rare Earths, 22, 3, (2004)
[23]  
Xiong G., Zhao M., Zhao L., Et al., Influence of RE on microstructure and properties of die steel by QPQ salt-bath treatment, Mater Heat Treatment, 39, 4, (2010)
[24]  
Wang X., Liu A., Zhao H., Study on RE lon nitro-carbnrizing used for 4Cr5MoSiVl casting mold, Mechanical Sci Technol Aerospace Eng, 31, 10, (2012)
[25]  
Somers M.A.J., Mittemeijer E.J., Formationg and growth of compound layer on nitrocarburizing iron: Kinetics and microstructural evolution, Surf Eng, 3, 2, (1987)
[26]  
Menthe E., Rie K.T., Plasma nitriding and plasma nitrocarburizing of electroplated hard chromium to increase the wear and the corrosion properties, Surf Coat Technol, 112, 1, (1999)
[27]  
Hong Z., Yin F., Research of the application of rare earth on the low-temperature nitrocarbusing for dies & molds, Natural Science J Xiangtan University, 19, 4, (1997)
[28]  
Yan M.F., Liu R.L., Martensitic stainless steel modified by plasma nitrocarburizing at conventional temperature with and without rare earths addition, Surf Coat Technol, 205, (2010)
[29]  
Cheng X., Xie C., Lu M., Application of rare earth elements in chemical heat treatment process, Shanghai Metals, 15, 3, (1993)
[30]  
Wang B., Zhang G., Liu C., Brief analysis of rare earth nitriding mechanism, Heat Treatment Technol Equipmet, 34, 6, (2013)