Progress in nitrocarburizing of steels with the addition of rare earth elements

被引：0

作者：

Zhang L. ^{[1
,2
]}

Zhang J. ^{[1
,2
]}

Ren Q. ^{[3
]}

Fu H. ^{[1
,2
]}

机构：

[1] Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing

[2] Beijing Key Laboratory for Corrosion, Erosion and Surface Technology, Beijing

[3] Manufacturing Technology Department, Chongqing Jianshe Industry(Group) Co. Ltd, Chongqing

来源：

Cailiao Daobao/Materials Review | 2016年 / 30卷 / 10期

关键词：

Nitrocarburizing; Rare earth; Steel;

D O I：

10.11896/j.issn.1005-023X.2016.19.003

中图分类号：

学科分类号：

摘要：

Rare earth elements are benefit for improving the hardness and wear resistance properties of nitrocarburizing layers. The effect of rare earth on nitrocarburizing process and corresponding mechanism of steel should be further studied. The paper gives a review of the main research activities recently carried out in the development and types of nitrocarburizing of steels with addition of rare earth elements. The focus is the addition methods and the mechanism of rare earth in five processes of nitrocarburizing. After a brief summarizes of the effect of rare earth on the properties of nitrocarburizing layers and substrate, the paper discusses the challenges and puts forward some suggestions of nitrocarburizing with rare earth. © 2016, Materials Review Magazine. All right reserved.

引用

页码：19 / 25

页数：6

共 41 条

[11]

Lillieqvist E.S., Mickelson C.G., Alloy steel and method of making

[12]

Norman H.K., Ernest G.K., Coated crucible and crucible and mold coating method

[13]

Wei Y., Liu Z., Wang C., Et al., A note on coating of surface diffusion-infiltration of RE on steel 20 and Armco iron by chemical process, Acta Metall Sinica, 19, 5, (1983)

[14]

Yan M., Liu Z., Chen Y., Characterization on rare earth nitrocarburized layer using X-ray diffraction analysis, Ordnance Mater Sci Eng, 11, (1991)

[15]

Cheng X., Liu J., Ding D., Et al., The effect of rare earth elements on impact wear-resistance of soft nitriding layer, J Solid Lubrication, 10, 4, (1990)

[16]

Chen W., Qin Z., Influence of rare earth elements on properties and structure of nitrocarburizing penetrated layer of 40Cr steel, Heat Treatment Metals, 1, (1998)

[17]

Yin F., Hong Z., Investigation on the processes of RE-carbonitriding, Natural Science J Xiangtan University, 18, 4, (1996)

[18]

Tang L.N., Yan M.F., Microstructure and mechanical properties of surface layers of 30CrMnSiA steel plasma nitrocarburized with rare earth addition, J Rare Earths, 30, 12, (2012)

[19]

You Y., Yan M.F., Chen H.T., Interactions of carbon-nitrogen and carbon-nitrogen-vacancy in α-Fe from first-principles calculations, Computational Mater Sci, 67, (2013)

[20]

Wu Y., Characterization of grain microstructure and properties of formed phases in rare earth nitrocarburized layer of a nanocrystallized 18Ni alloy, (2011)

← 1 2 3 4 5 →