Progress in nitrocarburizing of steels with the addition of rare earth elements

被引：0

作者：

Zhang L. ^{[1
,2
]}

Zhang J. ^{[1
,2
]}

Ren Q. ^{[3
]}

Fu H. ^{[1
,2
]}

机构：

[1] Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing

[2] Beijing Key Laboratory for Corrosion, Erosion and Surface Technology, Beijing

[3] Manufacturing Technology Department, Chongqing Jianshe Industry(Group) Co. Ltd, Chongqing

来源：

Cailiao Daobao/Materials Review | 2016年 / 30卷 / 10期

关键词：

Nitrocarburizing; Rare earth; Steel;

D O I：

10.11896/j.issn.1005-023X.2016.19.003

中图分类号：

学科分类号：

摘要：

Rare earth elements are benefit for improving the hardness and wear resistance properties of nitrocarburizing layers. The effect of rare earth on nitrocarburizing process and corresponding mechanism of steel should be further studied. The paper gives a review of the main research activities recently carried out in the development and types of nitrocarburizing of steels with addition of rare earth elements. The focus is the addition methods and the mechanism of rare earth in five processes of nitrocarburizing. After a brief summarizes of the effect of rare earth on the properties of nitrocarburizing layers and substrate, the paper discusses the challenges and puts forward some suggestions of nitrocarburizing with rare earth. © 2016, Materials Review Magazine. All right reserved.

引用

页码：19 / 25

页数：6

共 41 条

[1]

Czerwinski F., Heat Treatment-conventional and Novel Applications, (2012)

[2]

Pye D.L., Practical Nitriding and Ferritic Nitrocarburizing, (2003)

[3]

Whyte J.R., Molten Salt Electrolysis of Rare Earth Metals from Chloride Melts with Emphasis on Neodymium, (1992)

[4]

Dai M.Y., Li C.Y., Hu J., The enhancement effect and kinetics of rare earth assisted salt bath nitriding, J Alloys Compd, 688, (2016)

[5]

Jaoul C., Belmonte T., Czerwiec T., Et al., Nitrocarburizing treatments using flowing afterglow processes, Appl Surf Sci, 252, 23, (2006)

[6]

Anjos A.D., Scheuer C.J., Brunatto S.F., Et al., Low-temperature plasma nitrocarburizing of the AISI 420 martensitic stainless steel: Microstructure and process kinetics, Surf Coat Technol, 275, (2015)

[7]

Alphonsa J., Raja V.S., Mukherjee S., Development of highly hard and corrosion resistant A286 stainless steel through plasma nitrocarburizing process, Surf Coat Technol, 280, (2015)

[8]

Cleugha D., Blawertb C., Steinbachc J., Et al., Effects of rare earth additions on nitriding of EN40B by plasma immersion ion implantation, Surf Coat Technol, 142-144, (2001)

[9]

Sartowska B., Piekoszewski J., Walis L., Et al., Improvement of tribological properties of stainless steel by alloying its surface layer with rare earth elements using high intensity pulsed plasma beams, Surf Coat Technol, 205, (2011)

[10]

Tisdale J.N.F., Tisdale N.F., Manufacture of iron and steel and pro-ducts obtained

← 1 2 3 4 5 →