Damage Evolution and Crack Identification of CSG Material Based on Acoustic Emission Detection Technology

被引：0

作者：

Huang, Hu ^{[1
]}

Liu, Zhaohan ^{[1
]}

Qiu, Qingming ^{[1
]}

Cao, Kelei ^{[1
]}

Guo, Lixia ^{[1
]}

机构：

[1] School of Water Conservancy, North China University of Water Resources and Electric Power, Zhengzhou

来源：

Jianzhu Cailiao Xuebao/Journal of Building Materials | 2024年 / 27卷 / 06期

关键词：

acoustic emission; cemented sand and gravel material; crack type; Gaussian mixture model; spatio‑temporal evolution;

D O I：

10.3969/j.issn.1007-9629.2024.06.012

中图分类号：

学科分类号：

摘要：

To reveal the damage evolution mechanism and crack classification evolution law of cemented sand and gravel（CSG）materials from a microscopic perspective，the Geiger time difference positioning method，rising angle-average frequency method，and Gaussian mixture model were employed to identify the crack types of CSG materials. The results show that the failure process of CSG materials can be divided into four stages，initial crack closure，new crack propagation，crack coalescence and peak failure. The three-dimensional positioning of acoustic emission events intuitively reflects the dynamic evolution process from crack initiation，propagation to penetration. Through crack type identification，shear cracks predominate in the early loading stage，and the proportion of tensile cracks increases later. Before failure，the ratio of shear to tensile crack is about 2∶1 at high water-binder ratio，and about 1∶1 at low water-binder ratio. © 2024 Tongji University. All rights reserved.

引用

页码：565 / 572

页数：7

共 15 条

[1]

CAI Xin, WU Yingli, LI Hongxuan, Et al., Constitutive equation for CSG materials ［J］, Chinese Journal of Geotechnical Engineering, 32, 9, pp. 1340-1344, (2010)

[2]

GUO Lei, LI Zexuan, TIAN Qingqing, Et al., Predictive analysis of cemented sand and gravel splitting tensile strength based on XGBoost algorithm［J］, Journal of Building Materials, 26, 4, pp. 378-382, (2023)

[3]

HUANG Hu, LI Po, HUO Wenlong, Et al., Study on relationship between mesoscopic and macroscopic mechanical parameters and failure model of cemented sand and gravel material［J］, Journal of North China University of Water Resources and Electric Power （Natural Science）, 41, 4, pp. 27-38, (2020)

[4]

GAN Yixiong, WU Shunchuan, REN Yi, Et al., Evaluation indexes of granite splitting failure based on RA and AF of AE parameters ［J］, Rock and Soil Mechanics, 41, 7, pp. 2324-2332, (2020)

[5]

LAI Yushu, XIONG Yan, CHENG Longfei, Study of characteristics of acoustic emission duringentire loading tests of concrete and its application［J］, Journal of Building Materials, 18, 3, pp. 380-386, (2015)

[6]

ZHANG Zhibo, LI Shujie, WANG Enyuan, Et al., Research on the damage evolution characteristics of coal based on cluster analysis of temporal-spatial dimension of acoustic emission events ［J］, Chinese Journal of Rock Mechanics and Engineering, 39, pp. 3338-3347, (2020)

[7]

FARHIDZADEH A，, SALAMONE S，, SINGLA P., A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures ［J］, Journal of Intelligent Material Systems and Structures, 24, 14, pp. 1722-1735, (2013)

[8]

FARHIDZADEH A, MPALASKAS A C，, MATIKAS T E，, Et al., Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features［J］, Construction and Building Materials, 67, pp. 129-138, (2014)

[9]

YANG D J, MA S W，, Et al., Analysis of dynamic fracture of granite after uniaxial recompression predamaged by high confining pressure cyclic loading based on acoustic emission ［J］, Engineering Fracture Mechanics, 266, pp. 108-414, (2022)

[10]

WANG Guilin, WANG Runqiu, SUN Fan, Et al., Study on RA-AF characteristics of acoustic emission and failure mode of karst-fissure limestone under uniaxial compression［J］, China Journal of Highway and Transport, 35, 8, pp. 118-128, (2022)

← 1 2 →