Numerical Simulation Study of Heat Transfer Mechanisms and Equivalent Model in Vapour Phase Soldering Integrated Process for Aerospace Printed Circuit Board

被引：0

作者：

Su, Yu ^{[1
]}

Xu, Qing ^{[1
]}

Jin, Ziqian ^{[1
]}

Meng, Yingze ^{[2
]}

Qi, Ting ^{[2
]}

Zhang, Peng ^{[2
]}

机构：

[1] School of Aerospace Engineering, Beijing Institute of Technology, Beijing

[2] Beijing Aerospace Automatic Control Institute, Beijing

来源：

Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology | 2025年 / 45卷 / 01期

关键词：

equivalent model; heat transfer mechanisms; numerical simulation; temperature distribution; vapour phase soldering;

D O I：

10.15918/j.tbit1001-0645.2024.059

中图分类号：

学科分类号：

摘要：

Numerical simulation of the vapour phase soldering process used in the integration of electronic devices and circuit boards in aerospace field is of great significance to revealing the fluid state in the vapor phase reflow oven, clarifying the heat transfer mechanism, optimizing the soldering parameters, and revealing the temperature distribution of the soldering circuit boards. A numerical simulation method for the simulation of vapour phase solering process was proposed. The complete model of vapor phase reflow oven was established. The fluid state in the reflow oven and the heat transfer mechanism between the fluid and the circuit board were analyzed. And the equivalent simulation model of a single steam layer was established by taking the temperature calculation results of the complete model as the boundary condition. By setting the pressure difference to control the temperature transfer rate, the equivalent model with circuit board was calculated to predict the temperature change of the soldering circuit board. Finally, design experiments to compare and verify the correctness of the model. The results show that the equivalent model is accurate in simulating the temperature distribution of circuit board, and is of great significance to optimizing the soldering parameters. © 2025 Beijing Institute of Technology. All rights reserved.

引用

页码：60 / 66

页数：6

共 17 条

[11]

ALAYA M A, MEGYERI V, BUSEK D., Effect of different thermocouple constructions on heat-level vapour phase soldering profiles[J], Soldering & Surface Mount Technology, 32, 4, pp. 253-259, (2020)

[12]

ILLES B, GECZY A., Multi-Physics modelling of a vapour phase soldering (VPS) system[J], Applied Thermal Engineering, 48, pp. 54-62, (2012)

[13]

ILLES B, GECZY A., Numerical simulation of condensate layer formation during vapour phase soldering, Applied Thermal Engineering, 70, 1, pp. 421-429, (2014)

[14]

ILLES B, GECZY A., Investigating the heat transfer on the top side of inclined printed circuit boards during vapour phase soldering[J], Applied Thermal Engineering, 103, pp. 1398-1407, (2016)

[15]

STRAUBINGER D, BOZSOKI I, ILLES B, Et al., Heat transfer aspects of condensation during vapour phase soldering on aligned PCB-based surfaces[J], Soldering & Surface Mount Technology, 32, 4, pp. 247-252, (2020)

[16]

WU Jun, MI Shiqiang, Analysis on heat transfer mechanism of vacuum vapor phase reflow soldering, Welding Technology, 51, 11, pp. 21-26, (2022)

[17]

MENTER F R., Two-equation eddy-viscosity turbulence models for engineering applications[J], American Institute of Aeronautics and Astronautics, 32, pp. 1598-1605, (1994)

← 1 2 →