X-ray imaging techniques for gas-solid fluidized beds: A technical review

被引:5
作者
Errigo, Matteo [1 ]
Lettieri, Paola [1 ]
Materazzi, Massimiliano [1 ]
机构
[1] UCL, Dept Chem Engn, Gower St, London, England
来源
PARTICUOLOGY | 2025年 / 101卷
关键词
X-ray digital radiography; X-ray computed tomography; X-ray imaging techniques; Gas solid fluidized bed; BUBBLE PROPERTIES; HOLD-UP; TOMOGRAPHY; VELOCITY; FLOW; HYDRODYNAMICS; PRESSURE; REACTOR; DIAMETER; DESIGN;
D O I
10.1016/j.partic.2023.11.013
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Gas-solid fluidized beds have historically been employed in a variety of fields owing to the excellent mixing they provide, which can enhance chemical reaction rates and make the control of the reactor temperature easier than other technologies. Due to this wide application, heuristic knowledge of their functioning has been accumulating over the years. This knowledge, however, is not always backed by a deep understanding of the physical phenomena occurring in such systems. While this heuristic knowledge is sufficient to operate fluidized beds, operation optimization and scale-up are much harder to perform. A range of diagnostic techniques have been applied over the years to draw information about the inner workings of fluidized beds. Among these, x-ray imaging techniques, especially x-ray digital radiography and x-ray computed tomography, stand out for the kind and quality of information they can provide. Their high penetrating power enables visualization of phenomena taking place in the bulk of a fluidized bed, without disturbing the bed hydrodynamics. Furthermore, x rays are generated by a source that can be switched off, making them inherently safer than other imaging techniques relying on radioactive sources, such as g-ray computed tomography. This work gives an overview of the techniques themselves, of the quantities they can measure, and of some modern applications of gas-solid fluidized beds they have been applied to, such as waste treatment and thermochemical conversion of biomass. Overall, x-ray digital radiography and x-ray computed tomography are better suited for process understanding than for process monitoring and are extremely useful in the study of voidage distribution and macro structures, such as bubbles and jets. (c) 2023 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).
引用
收藏
页码:67 / 89
页数:23
相关论文
共 121 条
[31]  
Drake JB, 2009, PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A-C, P1721
[32]   Traveling column for comparison of invasive and non-invasive fluidization voidage measurement techniques [J].
Dubrawski, K. ;
Tebianian, S. ;
Bi, H. T. ;
Chaouki, J. ;
Ellis, N. ;
Gerspacher, R. ;
Jafari, R. ;
Kantzas, A. ;
Lim, C. ;
Patience, G. S. ;
Pugsley, T. ;
Qi, M. Z. ;
Zhu, J. X. ;
Grace, J. R. .
POWDER TECHNOLOGY, 2013, 235 :203-220
[33]   Application of imaging techniques for the characterization of lumps behaviour in gas-solid fluidized-bed reactors [J].
Errigo, Matteo ;
Sebastiani, Alex ;
Iannello, Stefano ;
Materazzi, Massimiliano ;
Lettieri, Paola .
FUEL, 2023, 349
[34]  
Escudero D. R., 2014, Characterizing acoustic fluidized bed hydrodynamics using x-ray computed tomography
[35]   Minimum fluidization velocity in a 3D fluidized bed modified with an acoustic field [J].
Escudero, David ;
Heindel, Theodore J. .
CHEMICAL ENGINEERING JOURNAL, 2013, 231 :68-75
[36]   Bed height and material density effects on fluidized bed hydrodynamics [J].
Escudero, David ;
Heindel, Theodore J. .
CHEMICAL ENGINEERING SCIENCE, 2011, 66 (16) :3648-3655
[37]   Characterizing Jetting in an Acoustic Fluidized Bed Using X-Ray Computed Tomography [J].
Escudero, David R. ;
Heindel, Theodore J. .
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (04)
[38]   Acoustic fluidized bed hydrodynamics characterization using X-ray computed tomography [J].
Escudero, David R. ;
Heindel, Theodore J. .
CHEMICAL ENGINEERING JOURNAL, 2014, 243 :411-420
[39]   PRACTICAL CONE-BEAM ALGORITHM [J].
FELDKAMP, LA ;
DAVIS, LC ;
KRESS, JW .
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION, 1984, 1 (06) :612-619
[40]   An ultra fast electron beam x-ray tomography scanner [J].
Fischer, F. ;
Hoppe, D. ;
Schleicher, E. ;
Mattausch, G. ;
Flaske, H. ;
Bartel, R. ;
Hampel, U. .
MEASUREMENT SCIENCE AND TECHNOLOGY, 2008, 19 (09)