Membrane-Based SO2 Removal Using a Hollow Fiber Membrane Process for Flue Gas Treatment

被引:1
作者
Kim, Keehong [1 ]
Hazarika, Gauri [2 ,3 ]
Ingole, Pravin G. [2 ,3 ]
机构
[1] Natl Inst Environm Res, Incheon 22689, South Korea
[2] CSIR North East Inst Sci & Technol, Chem Engn Grp, Jorhat 785006, Assam, India
[3] Acad Sci & Innovat Res AcSIR, Ghaziabad 201002, Uttar Pradesh, India
基金
新加坡国家研究基金会;
关键词
SO2; removalefficiency; cellulose acetate; poly(ether sulfone); pilot-scale process; compositehollow fiber membrane; CARBON-DIOXIDE; SEPARATION; PERFORMANCE; CAPTURE;
D O I
10.1021/acsapm.5c00384
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Growing environmental concerns and stringent air pollution regulations have intensified the need for efficient gas separation technologies to mitigate hazardous industrial emissions. Flue gas emissions from power generation and manufacturing industries are a major source of sulfur dioxide (SO2), contributing to acid rain and environmental degradation. Membrane separation processes have emerged as an energy-efficient and sustainable solution for SO2 removal. Particularly, hollow fiber membranes (HFMs) offer significant advantages due to their high surface area-to-volume ratio, enabling efficient mass transfer and compact system configurations. This study focuses on designing and fabricating a pilot-scale poly(ether sulfone) (PES) hollow fiber membrane coated with cellulose acetate (CA) for SO2 removal from flue gas. The composite membrane was developed by coating a cellulose acetate (CA) layer onto PES HFMs via a solution-based continuous coating method. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) confirmed the presence and uniformity of the CA coating. Gas permeance measurements demonstrated that the pressure differential across the membrane influences membrane performance. The membrane's effectiveness was evaluated using emissions from an LPG boiler under varying operating conditions, revealing a high SO2 removal efficiency. A mixed-gas separation experiment assessed SO2 removal efficiency and the associated CO2 loss ratio. The results indicated a positive correlation between SO2 removal efficiency and the loss ratios of other gas components, driven by their inherent permeance characteristics, with SO2 permeance reaching up to 702.4 GPU. Under optimized conditions, the membrane achieved over 91% SO2 removal efficiency while maintaining the CO2 loss ratio. This study confirms the feasibility of using pilot-scale HFMs for SO2 removal from flue gas, highlighting their potential for industrial gas separation and sustainable pollution control.
引用
收藏
页码:6789 / 6799
页数:11
相关论文
共 41 条
[31]   The effect of surfactants on the structure and performance of PES membrane for separation of carbon dioxide from methane [J].
Saedi, Sh ;
Madaeni, S. S. ;
Shamsabadi, A. Arabi ;
Mottaghi, F. .
SEPARATION AND PURIFICATION TECHNOLOGY, 2012, 99 :104-119
[32]   SO2 dry-based catalytic removal from flue gas leading to elemental sulfur production: A comprehensive review [J].
Sepehrian, Mohammad ;
Anbia, Mansoor ;
Hedayatzadeh, Mohammad Hossein ;
Yazdi, Fatemeh .
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2024, 182 :456-480
[33]   Sulphur impacts during pulverised coal combustion in oxy-fuel technology for carbon capture and storage [J].
Stanger, Rohan ;
Wall, Terry .
PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2011, 37 (01) :69-88
[34]   Studies of SO2- and O2-induced degradation of aqueous MEA during CO2 capture from power plant flue gas streams [J].
Uyanga, Itoro J. ;
Idem, Raphael O. .
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2007, 46 (08) :2558-2566
[35]   A MODEL FOR DIFFUSION IN A GLASSY POLYMER [J].
VIETH, WR ;
SLADEK, KJ .
JOURNAL OF COLLOID SCIENCE, 1965, 20 (09) :1014-&
[36]   Preparation of mixed matrix membrane with high efficiency SO2 separation performance by photosensitive modification and enhanced adsorption of metal-organic framework [J].
Xin, Qingping ;
Gao, Lei ;
Ma, Faxin ;
Wang, Shaofei ;
Xuan, Guangyu ;
Ma, Xiaohua ;
Wei, Mengting ;
Zhang, Lei ;
Zhang, Yuzhong .
JOURNAL OF MATERIALS SCIENCE, 2023, 58 (14) :6185-6202
[37]   Electrospinning in membrane contactor: manufacturing Elec-PVDF/SiO2 superhydrophobic surface for efficient flue gas desulphurization applications [J].
Xin, Qingping ;
Xie, Kaiqiang ;
Liang, Qingqing ;
Li, Xu ;
Zeng, Yinan ;
Zhao, Yuhang ;
Zhang, Lei ;
Wang, Shaofei ;
Li, Hong ;
Zhang, Yuzhong .
GREEN CHEMICAL ENGINEERING, 2021, 2 (01) :111-121
[38]   Metal organic frameworks decorated membrane contactor constructing SO2 -philic channels for efficient flue gas desulphurization [J].
Xin, Qingping ;
An, Ke ;
Zhang, Yu ;
Yun, Mingya ;
Wang, Shaofei ;
Lin, Ligang ;
Ye, Hui ;
Ding, Xiaoli ;
Li, Hong ;
Zhang, Yuzhong .
JOURNAL OF MEMBRANE SCIENCE, 2021, 620
[39]   Preparation, characterization and applicability of cellulose acetate-polyurethane blend membrane in separation techniques [J].
Zavastin, Daniela ;
Cretescu, Igor ;
Bezdadea, Mariana ;
Bourceanu, Militina ;
Dragan, Maria ;
Lisa, Gabriela ;
Mangalagiu, Ionel ;
Vasic, Vesna ;
Savic, Jasmina .
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2010, 370 (1-3) :120-128
[40]   Mixed matrix membrane contactor containing core-shell hierarchical Cu@4A filler for efficient SO2 capture [J].
Zhang, Lei ;
Xin, Qingping ;
Lou, Liguo ;
Li, Xu ;
Zhang, Leitao ;
Wang, Shaofei ;
Li, Yifan ;
Zhang, Yuzhong ;
Wu, Hong ;
Jiang, Zhongyi .
JOURNAL OF HAZARDOUS MATERIALS, 2019, 376 :160-169