Functionalization of layered double hydroxides on bentonite for cesium and iodine retention in high-level radioactive waste disposal

被引：0

作者：

Kim, Jueun ^{[1
]}

Hong, Seokju ^{[1
]}

Lee, Gijun ^{[3
]}

Um, Wooyong ^{[1
,2
]}

机构：

[1] Division of Advanced Nuclear Engineering, POSTECH, 77, Cheongam-ro, Nam-gu, Pohang

[2] Division of Environmental Science & Engineering, POSTECH, 77, Cheongam-ro, Nam-gu, Pohang

[3] Disposal Safety Evaluation Research Division, Korea Atomic Energy Research Institute, Daejeon

来源：

Chemosphere | 2025年 / 370卷

基金：

新加坡国家研究基金会;

关键词：

Bentonite; Layered double hydroxides; Sorption; Thermal-hydraulic-mechanical-chemical;

D O I：

10.1016/j.chemosphere.2024.144014

中图分类号：

学科分类号：

摘要：

Bentonite is regarded as an adequate buffer material in deep geological repositories and its swelling properties serve to prevent the penetration of groundwater into the repository and to minimize the release of radionuclides. However, bentonite is rarely effective in removing anionic radionuclides due to its permanent negative surface charge. The aim of this study was to enhance the anion removal ability of bentonite by incorporating layered double hydroxides (LDH) with a high anion exchange capacity. The functionalization of CuAlBi LDH on bentonite (CuAlBi LDH@Ben) revealed an effective approach for removing both cesium and iodine from aqueous solutions. The peak shift of the Si–O stretching band to higher frequencies, the vertically oriented platelet morphology, and the increase in specific surface area provide confirmation that LDH platelets grow on the surface of montmorillonite. The CuAlBi LDH@Ben demonstrates enhanced anion retention performance in bentonite without impacting its retention behavior toward cations, as evidenced by Kd values of 1943.1 mL/g for Cs+, 442.4 mL/g for I−, and 650.7 mL/g for IO3−, respectively. © 2024 Elsevier Ltd

引用

共 54 条

[1]

Ab S.K., Design and Production of the KBS-3 Repository, (2010)

[2]

Apted M.J., Ahn J., Repository 101: multiple-barrier geological repository design and isolation strategies for safe disposal of radioactive materials, Geological Repository Systems for Safe Disposal of Spent Nuclear Fuels and Radioactive Waste, pp. 3-26, (2017)

[3]

Arai Y., Ogawa M., Preparation of Co–Al layered double hydroxides by the hydrothermal urea method for controlled particle size, Appl. Clay Sci., 42, pp. 601-604, (2009)

[4]

Aramendia M.A.A., Et al., Comparative study of Mg/M (III)(M= Al, Ga, In) layered double hydroxides obtained by coprecipitation and the sol–gel method, J. Solid State Chem., 168, pp. 156-161, (2002)

[5]

Arrabito G., Et al., Layered double hydroxides: a toolbox for chemistry and biology, Crystals, 9, (2019)

[6]

Baille W., Et al., Swelling pressures and one-dimensional compressibility behaviour of bentonite at large pressures, Appl. Clay Sci., 48, pp. 324-333, (2010)

[7]

Belskaya O.B., Et al., Synthesis of CuAl-LDHs by Co-precipitation and mechanochemical methods and selective hydrogenation catalysts based on them, Inorganics, 11, (2023)

[8]

Biesinger M.C., Advanced analysis of copper X‐ray photoelectron spectra, Surf. Interface Anal., 49, pp. 1325-1334, (2017)

[9]

Bergaya F., Lagaly G., Handbook of Clay Science, (2013)

[10]

Biesinger M.C., Et al., Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni, Appl. Surf. Sci., 257, pp. 2717-2730, (2011)

← 1 2 3 4 5 6 →