Digital Light Processing 3D Printing Technology in Biomedical Engineering: A Review

被引：0
作者：
Chang, Xin-Zhu [1 ,2 ]
Liu, Jian-Shan [1 ,2 ]
Lu, Jia-Qi [1 ,2 ]
机构：
[1] Hebei Univ Technol, Ctr Adv Laser Technol, Tianjin 300401, Peoples R China
[2] Hebei Univ Technol, Hebei Key Lab Adv Laser Technol & Equipment, Tianjin 300401, Peoples R China
来源：
MACROMOLECULAR BIOSCIENCE | 2025年 / 25卷 / 08期
基金：
中国国家自然科学基金;
关键词：
3D printing; biomedical engineering; digital light processing; FLEXURAL STRENGTH; OXYGEN INHIBITION; STEM-CELLS; PHOTOPOLYMERIZATION; STEREOLITHOGRAPHY; CHALLENGES; DESIGN; MICRONEEDLES; REGENERATION; CONSTRUCTS;
D O I：
10.1002/mabi.202500101
中图分类号：
Q5 [生物化学]; Q7 [分子生物学];
学科分类号：
071010 ; 081704 ;
摘要：
As one of the 3D printing technologies, digital light processing (DLP) 3D printing technology has been widely applied in biomedical engineering. The principles and advantages of DLP 3D printing technology are compared with other 3D printing technologies, while the characteristics and applicable fields of each technique are analyzed. The applications of DLP 3D printing technology in tissue engineering, medical devices and pharmaceutical field are classified and summarized. Besides, the prospects and challenges of DLP 3D printing technology in biomedical engineering are discussed. With continuous advancement, DLP 3D printing technology will play an increasingly important role in personalized medicine and regenerative medicine.
引用
收藏
页数：20
相关论文
共 176 条
[1]   3D Printing of Thermo-Sensitive Drugs [J].
Abdella, Sadikalmahdi ;
Youssef, Souha H. ;
Afinjuomo, Franklin ;
Song, Yunmei ;
Fouladian, Paris ;
Upton, Richard ;
Garg, Sanjay .
PHARMACEUTICS, 2021, 13 (09)
[2]   Powder bed fusion -laser beam (PBF-LB) three-dimensional (3D) printing: Influence of laser hatching distance on the properties of zolpidem tartrate tablets [J].
Adamov, Ivana ;
Stanojevic, Gordana ;
Pavlovic, Stefan M. ;
Medarevic, Djordje ;
Ivkovic, Branka ;
Kocovic, David ;
Ibric, Svetlana .
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2024, 657
[3]   Formulation and characterization of immediate-release oral dosage forms with zolpidem tartrate fabricated by digital light processing (DLP) 3D printing technique [J].
Adamov, Ivana ;
Stanojevic, Gordana ;
Medarevic, Djordje ;
Ivkovic, Branka ;
Kocovic, David ;
Mirkovic, Dusica ;
Ibric, Svetlana .
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2022, 624
[4]   Clopidogrel-loaded vascular grafts prepared using digital light processing 3D printing [J].
Adhami, Masoud ;
Picco, Camila J. ;
Detamornrat, Usanee ;
Anjani, Qonita K. ;
Cornelius, Victoria A. ;
Robles-Martinez, Pamela ;
Margariti, Andriana ;
Donnelly, Ryan F. ;
Dominguez-Robles, Juan ;
Larraneta, Eneko .
DRUG DELIVERY AND TRANSLATIONAL RESEARCH, 2024, 14 (06) :1693-1707
[5]   Hardware implementation of memristor-based artificial neural networks [J].
Aguirre, Fernando ;
Sebastian, Abu ;
Le Gallo, Manuel ;
Song, Wenhao ;
Wang, Tong ;
Yang, J. Joshua ;
Lu, Wei ;
Chang, Meng-Fan ;
Ielmini, Daniele ;
Yang, Yuchao ;
Mehonic, Adnan ;
Kenyon, Anthony ;
Villena, Marco A. ;
Roldan, Juan B. ;
Wu, Yuting ;
Hsu, Hung-Hsi ;
Raghavan, Nagarajan ;
Sune, Jordi ;
Miranda, Enrique ;
Eltawil, Ahmed ;
Setti, Gianluca ;
Smagulova, Kamilya ;
Salama, Khaled N. ;
Krestinskaya, Olga ;
Yan, Xiaobing ;
Ang, Kah-Wee ;
Jain, Samarth ;
Li, Sifan ;
Alharbi, Osamah ;
Pazos, Sebastian ;
Lanza, Mario .
NATURE COMMUNICATIONS, 2024, 15 (01)
[6]   Implication of microneedles for ocular drug delivery systems [J].
Al-Nimry, Suhair ;
Abu Dayah, Alaa .
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY, 2024, 98
[7]   Spectrophotometric determination of celecoxib and tramadol in the new approved formulated dosage form using principle component regression assistive model [J].
Almalki, Atiah H. ;
Alzhrani, Rami M. ;
Alosaimi, Manal E. ;
Abduljabbar, Maram H. ;
Alaqel, Saleh l. ;
Alharbi, Adnan ;
Ramzy, Sherif .
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY, 2024, 320
[8]   Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells [J].
Arcaute, Karina ;
Mann, Brenda K. ;
Wicker, Ryan B. .
ANNALS OF BIOMEDICAL ENGINEERING, 2006, 34 (09) :1429-1441
[9]   Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds [J].
Arcaute, Karina ;
Mann, Brenda ;
Wicker, Ryan .
ACTA BIOMATERIALIA, 2010, 6 (03) :1047-1054
[10]   Architectural differences in photopolymerized PEG-based thiol-acrylate hydrogels enable enhanced mechanical properties and 3D printability [J].
Arreguin-Campos, Mariana ;
Ebrahimi, Mahsa ;
Dookhith, Aaliyah Z. ;
Lynd, Nathaniel A. ;
Sanoja, Gabriel E. ;
Aldana, Ana A. ;
Baker, Matthew B. ;
Pitet, Louis M. .
EUROPEAN POLYMER JOURNAL, 2024, 212
12345678910