A MODIFIED ANALYTICAL MODEL FOR DYNAMIC INCREASE FACTOR OF TENSILE STRENGTH OF CONCRETE

被引：0

作者：

Li, Dong ^{[1
]}

Gao, Kun ^{[1
]}

Jin, Liu ^{[1
]}

Du, Xiu-Li ^{[1
]}

机构：

[1] Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education, Beijing University of Technology, Beijing

来源：

Gongcheng Lixue/Engineering Mechanics | 2025年 / 42卷 / 02期

关键词：

concrete; dynamic increase factor; dynamic strength; strain rate effect; tensile strength;

D O I：

10.6052/j.issn.1000-4750.2022.09.0798

中图分类号：

学科分类号：

摘要：

The rate sensitivity of concrete strength is one of the important scientific problems in the field of concrete mechanics. The existing prediction methods for the dynamic increase factor of concrete are still mainly based on the data fitting model, and the fitting parameters usually have no actual physical significance, thusly it cannot relate to the mechanism interpretation of the concrete rate sensitivity. This paper takes the tensile strength of concrete as the research object. Based on the basic concepts of self-consistent finite stress model and on Newton's law of motion, derived and established is the mathematical equation of a dynamic increase factor which can reflect the strain rate effect mechanism of concrete. Based on a fib specification model and a J criterion model, proposed is a semi-analytical and semi-empirical analysis method to analyze the dynamic increase factor of concrete tensile strength. Through the case analysis based on mesoscopic numerical tests and the comparison based on the test data in the literature, it is verified that the analytical model revised can effectively reflect the real physical law of the dynamic increase factor of concrete tensile strength. © 2025 Tsinghua University. All rights reserved.

引用

页码：41 / 53

页数：12

共 38 条

[1]

GB 51247−2018, Standard for seismic design of hydraulic structures, (2018)

[2]

CEB-FIP model code 1990: Design code [M], (1993)

[3]

MALVAR L J, ROSS C A., Review of strain rate effects for concrete in tension, ACI Materials Journal, 95, 6, pp. 735-739, (1998)

[4]

fib Model code for concrete structures 2010 [M], (2013)

[5]

DU Xiuli, WANG Yang, LU Dechun, Non-linear uniaxial dynamic strength criterion for concrete, Journal of Hydraulic Engineering, 41, 3, pp. 300-309, (2010)

[6]

REINHARDT H W, WEERHEIJM J., Tensile fracture of concrete at high loading rates taking account of inertia and crack velocity effects, International Journal of Fracture, 51, 1, pp. 31-42, (1991)

[7]

PYO S, EL-TAWIL S., Crack velocity-dependent dynamic tensile behavior of concrete [J], International Journal of Impact Engineering, 55, pp. 63-70, (2013)

[8]

MOSIG O, CURBACH M., The crack propagation velocity as a reason for the strain rate effect of concrete: An analytical model [J], Civil Engineering Design, 2, 4, pp. 123-130, (2020)

[9]

ROSSI P., A physical phenomenon which can explain the mechanical behaviour of concrete under high strain rates, Materials and Structures, 24, 6, pp. 422-424, (1991)

[10]

ROSSI P, VAN MIER J G M, BOULAY C, Et al., The dynamic behaviour of concrete: Influence of free water, Materials and Structures, 25, 9, pp. 509-514, (1992)

← 1 2 3 4 →