Mode-I fracture behaviour of aramid/glass-epoxy interply hybrid composites

被引:0
作者
Kanakannavar, Sateeshkumar [1 ]
Biradar, Srikumar [2 ]
Hiremath, Shivashankar [3 ,4 ]
Rajole, Sangamesh [5 ]
Pitchaimani, Jeyaraj [6 ]
Kulkarni, S. M. [6 ]
Goh, Kheng-Lim [7 ,8 ]
机构
[1] Indian Inst Informat Technol Bhagalpur, Dept Mechatron & Automat Engn, Bhagalpur, Bihar, India
[2] Atria Inst Technol, Dept Mech Engn, Bangalore, Karnataka, India
[3] Manipal Acad Higher Educ, Manipal Inst Technol, Dept Mechatron, Manipal, Karnataka, India
[4] Survivabil Signal Intelligence Res Ctr, Seoul, South Korea
[5] Cent Univ Karnataka Kadaganchi, Sch Engn, Dept Mech Engn, Kalaburgi, Karnataka, India
[6] Natl Inst Technol Karnataka, Dept Mech Engn, Mangalore, Karnataka, India
[7] Newcastle Univ, Fac Sci Agr & Engn, Newcastle Upon Tyne, England
[8] Newcastle Univ Singapore, Adv Composites Res Grp, Singapore City, Singapore
关键词
aramid fibre; glass fibre; epoxy; hand layup; hybrid composites; tensile properties; fracture toughness; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; FLEXURAL PROPERTIES; POLYMER COMPOSITES; STACKING-SEQUENCE; MOISTURE-CONTENT; GLASS; CARBON; TOUGHNESS; ENERGY;
D O I
10.1177/14658011251330391
中图分类号
TB33 [复合材料];
学科分类号
摘要
This article presents the influence of hybridisation of aramid and glass fibre woven fabric on fracture toughness (KIC) of the composites. Experiments using single-edge-notched-bending (SENB) were conducted to investigate the hybridisation effect on the Mode I fracture toughness specimen of aramid/glass laminates. The results revealed that the aramid epoxy composites yielded the highest KIC, followed by aramid/glass epoxy hybrid composites, and finally, glass epoxy composites, which exhibited the lowest KIC. Fracture micrographs of the hybrid composites showed similar fracture patterns - fibre pullout, fibre rupture and matrix rupture - to those of the aramid and glass epoxy composites. The mechanical properties of the hybrid composites being inferior to those of the aramid epoxy composites suggest that there is no advantage in using glass fibres to partially replace aramid fibres in achieving hybrid composites.
引用
收藏
页码:166 / 179
页数:14
相关论文
共 63 条
[1]   Experimental Investigation on Tensile Properties of Carbon Fabric-Glass Fabric-Kevlar Fabric-Epoxy Hybrid Composite Laminates [J].
Al Khaddour, Samer ;
Ibrahim, Mohamad Barkat .
REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS, 2021, 31 (03) :145-151
[2]   Impact Response and Damage Tolerance of Hybrid Glass/Kevlar-Fibre Epoxy Structural Composites [J].
Alagumalai, Vasudevan ;
Shanmugam, Vigneshwaran ;
Balasubramanian, Navin Kumar ;
Krishnamoorthy, Yoganandam ;
Ganesan, Velmurugan ;
Forsth, Michael ;
Sas, Gabriel ;
Berto, Filippo ;
Chanda, Avishek ;
Das, Oisik .
POLYMERS, 2021, 13 (16)
[3]  
[Anonymous], 2008, American Society For Testing And Materials, P6, DOI 10.1520/D0792-08.2
[4]  
[Anonymous], 2016, ASTM International, V82, P1
[5]   A Review on the Effect of Fabric Reinforcement on Strength Enhancement of Natural Fiber Composites [J].
Arumugam, Soundhar ;
Kandasamy, Jayakrishna ;
Venkatesan, Subramani ;
Murugan, Rajesh ;
Lakshmi Narayanan, Valayapathy ;
Sultan, Mohamed Thariq Hameed ;
Shahar, Farah Syazwani ;
Shah, Ain Umaira Md ;
Khan, Tabrej ;
Sebaey, Tamer Ali .
MATERIALS, 2022, 15 (09)
[6]   Fracture behavior of glass fiber reinforced polymer composite [J].
Avci, A ;
Arikan, H ;
Akdemir, A .
CEMENT AND CONCRETE RESEARCH, 2004, 34 (03) :429-434
[7]   Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites [J].
Boopalan, M. ;
Niranjanaa, M. ;
Umapathy, M. J. .
COMPOSITES PART B-ENGINEERING, 2013, 51 :54-57
[8]   Rate effects in the fracture of glass fibre chopped strand mat composites [J].
Cantwell, WJ ;
Youd, SJ .
COMPOSITES PART B-ENGINEERING, 1997, 28 (5-6) :635-640
[9]   The transfer of matrix toughness to composite mode I interlaminar fracture toughness in glass-fibre/vinyl ester composites [J].
Compston, P ;
Jar, PYB ;
Burchill, PJ ;
Takahashi, K .
APPLIED COMPOSITE MATERIALS, 2002, 9 (05) :291-314
[10]   The variation in low speed impact strength on glass fiber/Kevlar composite hybrids [J].
Dionisio dos Santos, Jayna Katia ;
da Cunha, Rayane Dantas ;
de Amorim Junior, Wanderley Ferreira ;
Tavares dos Santos Felipe, Renata Carla ;
Braga Neto, Jose Lira ;
Freire Junior, Raimundo Carlos Silverio .
JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (21) :3009-3019