Constructing bio-based materials and monomer modules based on microbial fermentation

被引：0
作者：
Wang, Liangyu [1 ,2 ]
Cao, Hui [1 ,2 ,3 ]
Tan, Tianwei [1 ,2 ,3 ]
机构：
[1] State Key Laboratory of Green Biomanufacturing, Beijing
[2] National Energy R&D Center for Biorefinery, Beijing University of Chemical Technology, Beijing
[3] Biorefinery Engineering Research Center of the Ministry of Education, Beijing University of Chemical Technology, Beijing
来源：
Huagong Jinzhan/Chemical Industry and Engineering Progress | 2025年 / 44卷 / 05期
关键词：
bio-based materials; carbon source; ferment; monomers; plastic;
D O I：
10.16085/j.issn.1000-6613.2025-0319
中图分类号：
学科分类号：
摘要：
Bio-based materials are recognized as a critical enabler for advancing chemical engineering advanced materials toward industrial upgrading and transformation. This article focused on the fermentation methodologies employed in the production of bio-based materials and systematically summarized their progress across raw material, process, and product domains. The study also examined the technological barriers and challenges associated with the iterative updates of second-generation and third-generation carbon sources within the biomanufacturing industry. It proposed the construction of a multidimensional biomass carbon source supply system and guarantee mechanism. The article delved into the fermentation process technology for key polymer monomers such as ethylene glycol, 1,3-propanediol, 1,4-butanediol, succinic acid, adipic acid, and terephthalic acid, as well as polymer materials including polylactic acid, polyhydroxyalkanoates, hyaluronic acid, and bacterial cellulose. The study outlined four critical modules: bio-based plastics, bio-based rubbers, bio-based nylon, and bio-based polysaccharide materials. It advocated for enhancing the product system of bio-based materials through fermentation methods to gradually replace petrochemical-based materials, paving the way for future advancements in the field. © 2025 Chemical Industry Press Co., Ltd.. All rights reserved.
引用
收藏
页码：2394 / 2406
页数：12
相关论文
共 88 条
[11]  
CYWAR Robin M, RORRER Nicholas A, HOYT Caroline B, Et al., Bio-based polymers with performance-advantaged properties, Nature Reviews Materials, 7, 2, pp. 83-103, (2021)
[12]  
KAMRAN Muhammad, KAY Andrew, DAVIDSON Matthew G., Facile synthesis of a novel furanic monomer and its ADMET polymerization toward fully renewable functional polymers, ACS Sustainable Chemistry & Engineering, 12, 37, pp. 13798-13809, (2024)
[13]  
MANKER Lorenz P, DICK Graham R, DEMONGEOT Adrien, Et al., Sustainable polyesters via direct functionalization of lignocellulosic sugars, Nature Chemistry, 14, 9, pp. 976-984, (2022)
[14]  
ZHOU Wenjuan, FU Gang, QI Xianni, Et al., Upgrading microbial strains for fermentation industry, Chinese Journal of Biotechnology, 38, 11, pp. 4200-4218, (2022)
[15]  
DHARMARAJA Jeyaprakash, SHOBANA Sutha, ARVINDNARAYAN Sundaram, Et al., Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications, Bioresource Technology, 369, (2023)
[16]  
MADADI Meysam, SONG Guojie, GUPTA Vijai Kumar, Et al., Non-catalytic proteins as promising detoxifiers in lignocellulosic biomass pretreatment: Unveiling the mechanism for enhanced enzymatic hydrolysis, Green Chemistry, 25, 18, pp. 7141-7156, (2023)
[17]  
LI Ning, YAN Kexin, RUKKIJAKAN Thanya, Et al., Selective lignin arylation for biomass fractionation and benign bisphenols, Nature, 630, 8016, pp. 381-386, (2024)
[18]  
LUO Zhicheng, LIU Chong, RADU Alexandra, Et al., Carbon-carbon bond cleavage for a lignin refinery, Nature Chemical Engineering, 1, 1, pp. 61-72, (2024)
[19]  
LIU Xuan, ZHANG Huijie, XI Shuangshuang, Et al., Lignin-based ultrathin hydrogel coatings with strong substrate adhesion enabled by hydrophobic association, Advanced Functional Materials, 35, 3, (2025)
[20]  
YANG Guangxu, GONG Zhenggang, LUO Xiaolin, Et al., Bonding wood with uncondensed lignins as adhesives, Nature, 621, 7979, pp. 511-515, (2023)
123456789