Study on the aeroelastic performance of 15 MW wind turbine under yaw condition

被引:0
作者
Ma, Lu [1 ]
Li, Yijia [2 ]
Zhou, Le [2 ]
Yang, Dinghua [1 ]
Shen, Xin [2 ,3 ]
Du, Zhaohui [2 ,3 ]
机构
[1] China Three Gorges Corporation, Wuhan
[2] School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai
[3] Shanghai Non-carbon Energy Conversion and Utilization Institute, Shanghai
关键词
aeroelastic performance; blade deflection; free vortex wake method; geometrically exact beam theory; yaw condition;
D O I
10.3389/fenrg.2025.1571567
中图分类号
学科分类号
摘要
Introduction: The trend toward larger wind turbine has made the aeroelastic issues of the wind turbine blades more prominent. To investigate the effect of flexible deflection of hundred-meter-scale blades on wind turbine performance. Methods: The present study taking the IEA-15 MW wind turbine as the research object, and the aeroelastic coupling characteristics of the wind turbine under yaw condition are analyzed using the lifting-line free vortex wake model and a geometrically exact beam theory model. Results and Discussion: The results show that, the torsional deflection of the blades may cause the reduction of the angle of attack, leading to the decrease of the wind turbine loads. Furthermore, influenced by the additional velocity induced by blade flapwise deflection, the loads fluctuation of flexible blade is larger than those of rigid blade. As the yaw angle increases, the mean power of the wind turbine decreases, while the fluctuation amplitude increases. Besides, the mean value and fluctuation amplitude of the rotor tilt and yaw moments become larger, the angle of attack exhibits more significant fluctuation amplitude but reduced mean value, and the turbine wake contracts and skews more obviously. Copyright © 2025 Ma, Li, Zhou, Yang, Shen and Du.
引用
收藏
相关论文
共 36 条
[1]  
Amoretti T., Huet F., Garambois P., Roucoules L., Configurable dual rotor wind turbine model based on BEM method: Co-rotating and counter-rotating comparison, Energy Convers. Manag, 293, (2023)
[2]  
Bauchau O.A., Flexible multibody dynamics, (2011)
[3]  
Carrion M., Steijl R., Woodgate M., Barakos G.N., Munduate X., Gomez-Iradi S., Aeroelastic analysis of wind turbines using a tightly coupled CFD–CSD method, J. Fluids Struct, 50, pp. 392-415, (2014)
[4]  
Chen J., Shen X., Zhu X., Du Z., Study on composite bend-twist coupled wind turbine blade for passive load mitigation, Compos. Struct, 213, pp. 173-189, (2019)
[5]  
Chen J., Shen X., Zhu X., Du Z., A study on the capability of backward swept blades to mitigate loads of wind turbines in shear flow, J. ENERGY Resour. TECHNOLOGY-TRANSACTIONS ASME, 141, 8, (2019)
[6]  
Corniglion R., Harris J., Peyrard C., Capaldo M., Comparison of the free vortex wake and actuator line methods to study the loads of a wind turbine in imposed surge motion, J. Phys. Conf. Ser, 1618, 5, (2020)
[7]  
Dangi N., Sodja J., Ferreira C.S., Yu W., The effect of turbulent coherent structures in atmospheric flow on wind turbine loads, Renew. Energy, 241, (2025)
[8]  
Duan L., Sun Q., He Z., Li G., Wake topology and energy recovery in floating horizontal-axis wind turbines with harmonic surge motion, Energy, 260, (2022)
[9]  
Fu S., Li Z., Zhu W., Han X., Liang X., Yang H., Et al., Study on aerodynamic performance and wake characteristics of a floating offshore wind turbine under pitch motion, Renew. Energy, 205, pp. 317-325, (2023)
[10]  
Gaertner E., Rinker J., Sethuraman L., Zahle F., Anderson B., Barter G.E., Et al., IEA wind TCP task 37: definition of the IEA 15-megawatt offshore reference wind turbine, (2020)