Influence of Different Vortex Design on Parameter Analysis and Performance Optimization of Mixed-flow Pump Impeller

被引：0

作者：

Wang, Mengcheng ^{[1
]}

Ding, Zheng ^{[1
]}

Lin, Renrong ^{[2
]}

Zhang, Lingbo ^{[2
]}

Chen, Tingling ^{[2
]}

Xia, Weigang ^{[3
]}

Chen, Jiaqi ^{[1
]}

机构：

[1] College of Electrical, Energy and Power Engineering, Yangzhou University, Yangzhou

[2] Leo Croup Co., Ltd., Hangzhou

[3] Shanghai Kaiquan Pump Industry ( Croup) Co., Ltd.,, Shanghai

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2025年 / 56卷 / 03期

关键词：

compound vortex design; flow field analysis; free vortex design; mixed-flow pump; numerical simulation;

D O I：

10.6041/j.issn.1000-1298.2025.03.031

中图分类号：

学科分类号：

摘要：

According to different forms of circulation distribution, mixed flow pump design can be divided into free vortex, forced vortex, and composite vortex designs. A mixed flow pump model TJ - HL - 05 , whose performance has been widely verified in the South to North Water Transfer Project, was taken as the research object. Based on the inverse design method, the parameterization of the impeller blade under the nonlinear circulation distribution was realized with the help of the continuity equation, the energy equation and the simplified radial balance equation. On this basis, the parameter analysis of the mixed flow pump impeller under the nonlinear circulation distribution under different working conditions was studied by using the orthogonal experimental design, and the performance optimization of the mixed flow pump was completed based on the analysis results. The results showed that the circulation control parameters rvb and rvs had a significant impact on efficiency and head under all operating conditions, and compared with traditional free vortex design, compound vortex design had a higher optimization upper limit. Compared with the original model, the efficiency of the free vortex design optimization results was increased by 0. 31 percentage points, 1.63 percentage points, and 1.03 percentage points respectively under the 0. 8()des Q¿es , and 1. 2()des operating conditions, while the efficiency of the composite vortex design optimization results was increased by 1. 09 percentage points, 3. 51 percentage points, and 9. 71 percentage points, respectively, and the head difference between the three under the design operating conditions was relatively small. The results of the internal flow analysis indicated that using a compound vortex design that considered the distribution of circulation was beneficial for further improving the flow state at the outlet of the impeller, thereby reducing the hydraulic losses of downstream components of the impeller. © 2025 Chinese Society of Agricultural Machinery. All rights reserved.

引用

页码：312 / 322

页数：10

共 30 条

[1]

LI Yuhao, Stability analysis of the construction plan for large-scale mixed flow pumping stations for drainage and upgrading in the area [ J ], Yunnan Water Power, 40, 4, pp. 156-159, (2024)

[2]

CHAI Peihu, CHENG Shengpeng, HAN Guojun, Application of the combination of inclined flow pump and defogging cooling tower in the circulating water system of the alkali plant[ J ], Soda Ash Industry, 5, pp. 156-159, (2023)

[3]

LI Jiaxu, Analysis of pressure fluctuation characteristics of volute mixed-flow pump based on chaos theory [ D ], (2023)

[4]

WU C H., A general theory of three-dimensional flow in subsonic and supersonic turbomachines of axial, radia, and mixed-flow types[ J ], Transactions of the American Society of Mechanical Engineers, 74, 8, pp. 1363-1380, (1952)

[5]

ZANGENEH M., A compressible three-dimensional design method for radial and mixed flow turbomachinery blades [ J ], International Journal for Numerical Methods in Fluids, 13, 5, pp. 599-624, (2010)

[6]

ZANGENEH M., Inviscid-viscous interaction method for three-dimensional inverse design of centrifugal impellers [ J ], ASME Journal of Turbomachinery, 116, 2, pp. 280-290, (1994)

[7]

CHEN J Q, WANG M C, BAO Y H, Et al., Mixed-flow pump performance improvement based on circulation method [ J ], Frontiers in Energy Research, 11, (2023)

[8]

CHIKH M A A, BELAID I, KHELLADl S, Et al., Coupling of inverse method and cuckoo search algorithm for multiobjective optimization design of an axial flow pump[ J ], Proc. IMechE Part A

[9]

J. Power and Energy, 233, 8, pp. 988-1006, (2019)

[10]

YANG Wei, LEI Xiaoyu, ZHANG Zhimin, Et al., Hydraulic design of submersible axial-flow pump based on blade loading distributions [ J ], Transactions of the Chinese Society for Agricultural Machinery, 48, 11, pp. 179-187, (2017)

← 1 2 3 →