Mechanisms of microstructural evolution and their synergistic evolutionary behavior of a near (3 Ti alloy with lamellar structure during sub (3-transus hot deformation

被引:1
作者
Shi, Shuangxi [1 ]
Ge, Jinyang [2 ]
Zhang, Xiaoyong [2 ]
Zhang, Yong [1 ]
Wang, Zhiguo [1 ]
Liu, Zheng [1 ]
机构
[1] Guilin Univ Aerosp Technol, Guangxi Key Lab Special Engn Equipment & Control, Guilin 541004, Guangxi, Peoples R China
[2] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
基金
中国国家自然科学基金;
关键词
Near (3 Ti alloy; Dynamic globularization; Dynamic recrystallization; Dynamic recovery; Softening mechanism; ISOTHERMALLY COMPRESSED TI-5AL-2SN-2ZR-4MO-4CR; 2-PHASE TITANIUM-ALLOY; DYNAMIC RECRYSTALLIZATION; GLOBULARIZATION KINETICS; TEXTURE EVOLUTION; FLOW-STRESS; TI-17; ALLOY; ALPHA; WORKING; PHASE;
D O I
10.1016/j.jallcom.2025.180730
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Understanding microstructural evolution and its interactions is essential for designing hot working processes of near (3 Ti alloys. Dynamic globularization of lamellar alpha phase and DRX of (3 phase in Ti-55511 alloy during sub (3-transus compression were systematically investigated. The results show that these microstructural evolutions are closely related to the process parameters and evolve synergistically. The globularization fraction of lamellar alpha phase increases with decreasing strain rate and increasing deformation temperature. The lamellar alpha phase first forms an alpha/alpha internal interface through dislocation substructure or twin boundary evolution, and then the (3 matrix wedges into alpha phase along the interface to form thermally etched grooves. The centripetal force on the alpha/(3 interface surface induces the migration and diffusion of the alpha/(3 phase interface, and the lamellar alpha phase ultimately separates and globularizes along the internal interface. The (3 phase undergoes significant CDRX, mainly characterized by gradual sub-grain rotation and grain boundary migration. Its softening mechanism transitions from DRV to CDRX with increasing height reduction. The DRX fraction in (3 matrix initially increases then decreases with increasing deformation temperature due to competitive effects between nucleation and growth. Conversely, it shows a decreasing-then-increasing trend with increasing strain rate, attributed to the coupling effects of dynamic phase transition, alpha/(3 orientation evolution and dislocation proliferation rate on the DRX at different strain rates. Notably, preferentially activated (3 phase slip systems promotes columnar and conical slip initiation in alpha phase, thereby facilitating interfacial evolution and dynamic globularization of alpha phase. The globularized alpha grains also promote DRX nucleation of the (3 phase at alpha/(3 phase interface.
引用
收藏
页数:16
相关论文
共 52 条
[41]   The Formation of the ω Phase in the Titanium-iron System under Shear Deformation [J].
Straumal, B. B. ;
Kilmametov, A. R. ;
Mazilkin, A. A. ;
Gornakova, A. S. ;
Fabrichnaya, O. B. ;
Kriegel, M. J. ;
Rafaja, D. ;
Bulatov, M. F. ;
Nekrasov, A. N. ;
Baretzky, B. .
JETP LETTERS, 2020, 111 (10) :568-574
[42]   Initial flow softening and restoration mechanisms of isothermally compressed Ti-5Al-2Sn-2Zr-4Mo-4Cr with basketweave microstructure [J].
Sun, J. Z. ;
Li, M. Q. ;
Li, H. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 697 :132-140
[43]   Interaction effect between alpha and beta phases based on dynamic recrystallization of isothermally compressed Ti-5Al-2Sn-2Zr-4Mo-4Cr with basketweave microstructure [J].
Sun, J. Z. ;
Li, M. Q. ;
Li, H. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 692 :403-412
[44]   Dynamic globularization kinetics during hot working of Ti-17 alloy with initial lamellar microstructure [J].
Wang, Kaixuan ;
Zeng, Weidong ;
Zhao, Yongqing ;
Lai, Yunjin ;
Zhou, Yigang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11) :2559-2566
[45]   MODIFICATION OF ALPHA MORPHOLOGY IN TI-6AL-4V BY THERMOMECHANICAL PROCESSING [J].
WEISS, I ;
FROES, FH ;
EYLON, D ;
WELSCH, GE .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (11) :1935-1947
[46]   Work-hardening behaviors of typical solution-treated and aged Ni-based superalloys during hot deformation [J].
Wen, Dong-Xu ;
Lin, Y. C. ;
Chen, Jian ;
Chen, Xiao-Min ;
Zhang, Jin-Long ;
Liang, Ying-Jie ;
Li, Lei-Ting .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 618 :372-379
[47]   A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α plus β region [J].
Xiao, Yi-Wei ;
Lin, Y. C. ;
Jiang, Yu-Qiang ;
Zhang, Xiao-Yong ;
Pang, Guo-Dong ;
Wang, Dan ;
Zhou, Ke-Chao .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 790
[48]   Evolution of coordination between α and /3 phases for two-phase titanium alloy during hot working [J].
Xu, Jian-wei ;
Zeng, Wei-dong ;
Zhou, Da-di ;
He, Sheng-tong ;
Jia, Run-chen .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (11) :3428-3438
[49]   Analysis of flow softening during hot deformation of Ti-17 alloy with the lamellar structure [J].
Xu, Jianwei ;
Zeng, Weidong ;
Zhou, Dadi ;
Ma, Haoyuan ;
He, Shengtong ;
Chen, Wei .
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 767 :285-292
[50]   Microstructure evolution during isothermal forging and subsequent heat treatment of Ti-17 alloy with a lamellar colony structure [J].
Xu, Jianwei ;
Zeng, Weidong ;
Sun, Xin ;
Jia, Zhiqiang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 637 :449-455