Experimental thermal performance investigation of a commercial recyclic thermal energy storage integrated solar air heater

被引:1
作者
Singh, Satyender [1 ]
Chauhan, Ranchan [1 ]
Kumar, Vikash [1 ]
Kumar, Nagendra [1 ]
Chaurasiya, Shailendra Kumar [1 ]
机构
[1] Dr BR Ambedkar Natl Inst Technol Jalandhar, Dept Mech Engn, CFD & Heat Transfer Res Grp, Jalandhar 144008, Punjab, India
关键词
Solar air heater; Recycle air flow; PCM; Hot air; Latent heat storage; PHASE-CHANGE MATERIALS; OPTIMIZATION; PCM; IMPROVEMENT; DESIGN; FLAT;
D O I
10.1016/j.est.2025.117011
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This work presents the experimental thermal performance of a commercial thermal energy storage integrated solar air heater under recyclic air flow. Solar air heater is design for large absorber area of 2 m2, which is increased to about 12 % by using a wavy absorber plate of amplitude 0.01 m and 0.075 m as a wavelength. A thermal energy storage system of height 4 cm is developed by using two wavy plates, i.e., one as absorber plate and other as a lower plate. Paraffin wax of volume approximate to 80 kg and melting point of 38 degrees C as a phase change material (PCM) is used to achieve longer thermal energy backup. An excellent convective air heating, PCM melting and thermal energy backup is obtained using the wavy PCM unit as an integral part of the solar air heater. The advantages of employing recyclic air flow over and under the PCM unit are the high rate of heat transfer to air and heating of PCM unit from the bottom side before and after the mid of the day, i.e., about three hours including mid hours of the day. Designed solar air heater is constructed using commercial materials for high thermal outputs. The output of solar air heater presents a thermal backup of about 20-24 h at the maximum air temperature of 73 degrees C. The maximum outlet air temperature of about 73 degrees C, 64 degrees C, 67 degrees C and 65 degrees C is obtained during the month of June, July, August and September, respectively. The maximum Delta T of about 20-32 degrees C is obtained during the month of June-September. The mass flow rate of 0.01-0.02 kg/s is found suitable to provide almost 24 h' thermal backup during the month of June, while for others it is 0.01 kg/s. Marginal pressure drop penalty is obtained, which is found to be 48 Pa at a mass flow rate of 0.02 kg/s. The maximum thermal efficiency of the solar air heater is obtained during the month of June and found to be as 53 %. The results of the designed solar air heater are expected to support hot air requirements potentially for space heating applications.
引用
收藏
页数:15
相关论文
共 48 条
[11]  
Dickinson E., 2018, Solar energy technology handbook
[12]  
Duffie JA, 2020, Solar engineering of thermal processes, photovoltaics and wind
[13]   Solar air heater with phase change material: An energy analysis and a comparative study [J].
El Khadraoui, Aymen ;
Bouadila, Salwa ;
Kooli, Sami ;
Guizani, Amenallah ;
Farhat, Abdelhamid .
APPLIED THERMAL ENGINEERING, 2016, 107 :1057-1064
[14]   Performance study on a new solar air heater with integrated phase change materials and external recycle: A numerical and experimental study [J].
Farzan, Hadi ;
Zaim, Ehsan Hasan ;
Amiri, Tayebeh .
APPLIED THERMAL ENGINEERING, 2023, 223
[15]   Exploring the thermal performance of a solar air heater with a V-corrugated and shot-blasted absorber plate comprising nano-enhanced phase change materials [J].
Ganeshkumar, Poongavanam ;
Vigneswaran, V. S. ;
Murugan, P. ;
Cheralathan, M. ;
Velraj, R. ;
Kim, Seong Cheol ;
Ramkumar, Vanaraj .
JOURNAL OF ENERGY STORAGE, 2024, 77
[16]  
Garg H.P., 2012, industrial applications of solar energy, V2
[17]   Comparative study based on energy and exergy analyses of a baffled solar air heater with latent storage collector [J].
Ghiami, Amir ;
Ghiami, Shamsoddin .
APPLIED THERMAL ENGINEERING, 2018, 133 :797-808
[18]   Carbon nanotubes/paraffin wax nanocomposite for improving the performance of a solar air heating system [J].
Habib, Nasser A. ;
Ali, Ali J. ;
Chaichan, Miqdam T. ;
Kareem, Mays .
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2021, 23
[19]   A review on thermal energy storage systems in solar air heaters [J].
Haldorai, Sivarathinamoorthy ;
Gurusamy, Sureshkannan ;
Pradhapraj, Maruthaiyan .
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2019, 43 (12) :6061-6077
[20]   Thermo-hydraulic performance investigation of double pass solar air heater integrated with PCM-based thermal energy storage [J].
Hedau, Ankush ;
Singal, S. K. .
JOURNAL OF ENERGY STORAGE, 2024, 79