Design and Modeling of an Intelligent Robotic Gripper Using a Cam Mechanism with Position and Force Control Using an Adaptive Neuro-Fuzzy Computing Technique

Manufacturers increasingly turn to robotic gripper designs to improve the efficiency of gripping and moving objects and provide greater flexibility to these objects. Neuro-fuzzy techniques are the most widespread in developing gripper designs. In this study, the traditional gripper design is modified by adding a suitable cam that makes it compatible with the basic design, and an adaptive neuro-fuzzy inference system (ANFIS) is used in a MATLAB Simulink environment. The developed gripper investigates the follower path concerning the cam surface curve, and the gripper position is controlled using the developed ANFIS-PID. Three methods are examined in the developed ANFIS-PID controller: grid partitioning (genfis1), subtractive clustering (genfis2), and fuzzy C-means clustering (genfis3). The results show that the added cam can improve the gripping strength and that the ANFIS-PID model effectively handles the rise time and supported settling time. The developed ANFIS-PID controller demonstrates more efficient performance than Fuzzy-PID and traditional tuned-PID controllers. This proposed controller does not achieve any overshoot, and the rise time is improved by approximately 50-51%, and the steady-state error is improved by 75-95%, compared with Fuzzy-PID and tuned PID controllers. Moreover, the developed ANFIS-PID controller provides more stability for a wide range of set point displacements-0.05 cm, 0.5 cm, and 1.5 cm-during the testing period. The developed ANFIS-PID controller is not affected by disturbance, making it well suited for robotic gripper designs. Grip force control is also investigated using the proposed ANFIS-PID controller and compared with the Fuzzy-PID in three scenarios. The result from this force control proves objects' higher actual gripping performance by using the proposed ANFIS-PID.